truck wheel stops for sale, brand-new and used.

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.

Aluminum Angle 3/8 x 3/8 x 48 in, 1/16 in thick, NEW! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/8 x 3/8 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, FL, and sometimes from our truck.

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.

EVERETT HIGH SPEED NON-FERROUS 12" - 14" MITER SAW

DOALL 20" VERTICAL BAND SAW ~ NEW -------------------------------------------------------------------------------------------------------------------------------------------------------

ACCURA 02020 20 INCH 3 HP 220 VOLT BAND SAW This MONSTER saw features heavy gauge high rigidity welded.. steel cabinets. Cast iron blade wheels are fully balanced with rubber tires and travel on quality sealed bearings.

Count EZ Creaser. Made in USA! This machine creases paper to make perfect folds that are smooth and straight and also has a scoring/perforating capability.I bought this machine at an Allegra Printing closing sale but have changed our business model and will not be using it.

Therm-o-type mp-12 business card slitter Serial #: 9416 Business Card Slitters - THERM-O-TYPE Corp. - The MP-12 is the most advanced and productive twelve-up business card slitter available. Up to 40,000 four-up business card strips can be slit per hour, producing 160,000 finished cards.

Aluminum Angle 1-1/2” x 1-1/2” x 48 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – People buy these angles for making their own silk screen frames. You must cut these to the dimensions you need and fasten or rivet them together.

Up for sale is my personal machine. A Woodsman 12x wood chipper. Powered by a John Deere 4.5 Liter turbo diesel making 140hp.

3HP 220V Single phase or three phase over arm pin router by Woodtek. Very little use, it is like new condition. See specs below This will ship by common carrier (Truck).

3 Ft. by 2 In. Wide Roll of "Velcro-Type" Adhesive Backed Hook and Loop Fastener You get 3 ft of the hook side and 3 feet of the loop.

5 Ft. by 2 In. Wide Roll of "Velcro-Type" Adhesive Backed Hook and Loop Fastener You get 5 ft of the hook side and 5 feet of the loop.

3 Ft. by 2 In. Wide Roll of "Velcro-Type" Adhesive Backed Hook and Loop Fastener You get 3 ft of the hook side and 3 feet of the loop.

12Ft. by 2 In. Wide Roll of "Velcro-Type" Adhesive Backed Hook and Loop Fastener You get 12 ft of the hook side and 12 feet of the loop.

Mitsui 6" x 12" Hand Feed Precision Surface Grinder 1.3 HP Motor, 3580 RPM Equipped with: Walker LBP Fine-Pole Electromagnetic Chuck One-Shot Lubrication X Axis Clamping X & Y Axis Adjustable Depth Stops 180 x 13 x 31.75 wheel (mm) Leveling Pads Work Lamp Everything works. Includes loading on open top truck or trailer at no additional charge. Machine will not be skidded.

ACCURA 02020 20 INCH 3 HP 220 VOLT BAND SAW This MONSTER saw features heavy gauge high rigidity welded..steel cabinets.Cast iron blade wheels are fully balanced with rubber tires and travel on quality sealed bearings. 4" dust port is supplied standard. Foot pedal brake system st

Used, Bishamon EZ OFF Lifter! 2500# Capacity! Excellent Condition!