tungsten rods for sale, brand-new and used.

 

 

Quality products at affordable prices. Check out our

Brand new: 10 PACK TUNGSTEN ELECTRODE

Valmark made high quality welding and brazing rods with alloys exceeding industry standards. All position tough machinable tool steel, for repair of hot working dies, develops a high polish in service. Excellent impact and heat resistance.

Inconel Filler Metal 625 is recommended for gas metal arc and gas tungsten arc welding of nickel base alloys 625 and 601, Incoloy alloys, carbon steels, low alloy steels and stainless steels. This alloy is useful for jet engine applications requiring excellent stress-rupture strength, oxidation resistance to 1200°F, plus outstanding fatigue strength and cryogenic properties.

(5) POCO EDM-3 ISOMOLDED GRAPHITE RODS .2500 DIA X 6 LONG

Up for auction is 3 full packs and 1 partial pack of Welding rods. I was given these rods by a friend. So Please look at pictures for any questions needed to be asked.

You are buying 5 rods (approximately 1.4+ ounces, oz) of EutecRod 1601 Low Temperature Silver Brazing Soldering/Welding Rod. Each rod is 18" long and 1/16" in diameter. Yellow tipped.

Monel filler metal 60 is used for gas –tungsten-arc, gas-metal-arc, and submerged-arc welding of Monel alloys 400, R404, and K-500 .It is also used for surfacing of steel by the gas-metal-arc or submerged-arc processes. For certain gas-meal –arc conditions, a barrier layer of Nickel Filler Metal 61 is recommended .Submerged-arc welding with Monel filler metal 60 is done with INCOFLUX 5 Submerged Arc Flux You are looking at Nickel Alloy MONEL 60 ERNiCu-7 filler metal.

Monel filler metal 60 is used for gas –tungsten-arc, gas-metal-arc, and submerged-arc welding of Monel alloys 400, R404, and K-500 .It is also used for surfacing of steel by the gas-metal-arc or submerged-arc processes. For certain gas-meal –arc conditions, a barrier layer of Nickel Filler Metal 61 is recommended .Submerged-arc welding with Monel filler metal 60 is done with INCOFLUX 5 Submerged Arc Flux You are looking at Nickel Alloy MONEL 60 ERNiCu-7 filler metal.

MILLER ECONOTIG / STICK WELDER; USED LESS THAN 30 MINUTES; FOOT CONTROL AND FINGER CONTROL; ARGON GAUGES NO BOTTLE; GAS TUNGSTEN ARC & SHIELDED METAL ARC; COMES WITH MILD RODS, CARBON STEEL RODS; 34 POUNDS OF ASSORTED TIG RODS; 110 ASSORTED TUNGSTEN ELECTRODES; ASSORTED TIPS.

5pcs Carbide Micro Drill Bits 1.0mm CNC PCB Dremel 1/8 3.175mm Shank Features:

HAVE A WONDERFUL DAY!!

5PCSx 2.5mm Carbide End Mill Engraving Bits for CNC/PCB Machinery Rotary Burr

5pcs/lot 4.0mm Carbide End Mill Engraving Bits for CNC/PCB Machinery Rotary Burr 4.0*22*50mm

The rods for hardfacing metal surfaces which are exposed for abrasive wear. The rod‘s body is made of thin walled mild steel pipe imbedded with super hard tungsten carbid grains (WC). The rods are used for new ones and for restoration of worn surfaces supplying high resistant lay.

Hard facing rods are used for deposition of hard metal powder on metallic surface. This is a steel tube filled with matrix of Tungsten Carbide Powder. The rods for hardfacing metal surfaces are exposed for abrasive wear.

Hard facing rods are used for deposition of hard metal powder on metallic surface. This is a steel tube filled with matrix of Tungsten Carbide Powder. The rods for hardfacing metal surfaces are exposed for abrasive wear.