Gusher UD-XLONG 3/4 HP 3450 RPM Pump 40 GPM APPROXIMATE RETAIL VALUE: $1490.00 Gusher Pump Model: UD-XLONG Volts 230/460 Amp: 2.6/1.3 RPM: 3450 HP: 0.75 IMPELLER: 2217-1 REFERENCE: 35K940-80 Cast Iron Impeller 39-3/8" Long Up to 40 gallons per minute Commonly used for machine tool tank cooling and general purpose machine tool applications.
UP FOR SALE TURBINE PUMP , HERE ARE THE SPECS : Type Centrifugal HP 1/2 Phase 3 Voltage 208-230/460 Amps 1.8-1.7/0.9 Hz 60 Inlet (In.) 3/4 Outlet (In.) 3/4 Motor Enclosure ODP NEMA/IEC Frame
Dwyer HFS-2-02 In-line Flow Meter Dwyer HFS-2-02 In-line Flow Meter (0.2 to 2 gpm water) with 1/2" NPT & 316SS Body Designed for single-direction flow, recommended for use with system filtration of at least 74 microns or a 200 mesh screen. Some applications may also require magnetic filtration. In-line flow
You are bidding on A *NEW IN THE BOX*"KARMA-450XVE" COMMERCIAL MULTI PRODUCTS POST MIX DISPENSER, FAST DELIVERY MODELS 450XVE MULTI PRODUCT POST MIX DISPENSERS THESE DISPENSERS COME FROM THE FAC
This Speakman Co 5 Gallon Portable Emergency EYE & FACE WASH SE-597 has a stainless steel tank that look in good condition on the inside. The emergency wash does look with wear on the outside as it came from military surplus. The dial has no glass or protective plastic.
DISPOSABLE ICE MAKER WATER FILTER WITH COUPLERS FOR TASTE AND ODOR REMOVAL REPLACES WHIRLPOOL FILTER #4378411RB MAXIMUM FLOW: 0.75 GPM MAXIMUM PRESSURE: 125 PSI MAXIMUM WATER TEMPERATURE: 100 F SERVICE LIFE: APPROXIMATELY 6 MONTHS REMOVE UNWANTED ODORS, LIKE CHLORINE AND SOLID PARTICLES UP TO 20 MICRON SHOCK RESISTANT PLASTIC BODY STAND UP TP 125 PSIG WATER PRESSURE EASY INSTALLATION WITH PROVIDED COUPLERS IN EACH MODEL.
THIS AUCTION IS FOR ONE (1) ABOVE SEEN - NEW / UNUSED SURPLUS STANCOR - HEAVY DUTY SUBMERSIBLE SUMP PUMP W/ OIL MINDER MODEL: SE-40 SERIAL NO. 57462 VOLTAGE: 115V / 60 Hz 1-PHASE 0.
You are bidding on one (1) Jobe Rojo High Flow Low Pressure Float Valves 3/4" - 3/4" MPT Inlet, 6.8 GPM @ 75 PSI The Jobe "Rojo" 20mm inlet HIGH FLOW LOW PRESSURE float valve is designed to regulate the inflow of water to any sized water trough or even into tanks. The "Rojo" can be mounted through the side, the top or the base of the trough
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.