1 1 8 bore pulley for sale, brand-new and used.

4 Step Heavy Duty Cast Alum. Pulley, 1/2" Belt, Excellent Condition, Keyed, Allen screwed, 5/8" Bore 4 3/4"---4"---3"---2 1/2"; #CDC - 142---No Dents

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Tractive force lower cable position 6600 lbs, HP power required: 11-25, manual winch control, standard cable 165' x 3/8 and weighs 407 lbs., has a 3.3ft blade width, middle speed of cable is 3 ft/second, over height is 6.6 ft and it a category 1. The Uniforest M Series: 1. Upgrades three blade clutch is made out of thicker metal with elevates tears in bore holes 2.

The 85M winch has 18,700 lbs tractive force, lower cable position,70+ HP required, standard cable is 295'x9/16, it weighs 1241 lbs and has a 5.9' blade width, middle speed of cable is 2 ft/sec., blade width is 5.9', front to back is 5.9', winch height is 5.4',overall heigh tis 7.5' and it fits a category 2&3. The Uniforest M Series has taken the tried and true E series and made some improvements: 1.

The 35M log skidding winch has 7700 lbs tractive force, lower cable position, 16-45 HP required, standard cable is 230'x3/8, weighs 540 lbs and has a 3.9' blade width. Middle speed of cable is 3 ft/sec., blade width is 3.9 ft, 1.5 ft from front to back, winch height is 3.8 ft with an overall height of 6.6' and fits a category 1. The Uniforest M Series has taken the tried and true E series and made some improvements: 1.

Great kit for a DIY poultry plucker like the whizbang! For sale is an aluminum plate for a DIY poultry plucker, Steel flanged shaft, Barrel, 2 Bearings (pillow blocks), drive and driven pulleys, and 125 plucking fingers. I've attached a picture of a blank plate and also one with the fingers installed.

Great kit for a DIY poultry plucker like the whizbang! For sale is an aluminum plate for a DIY poultry plucker, Steel flanged shaft, 2 Bearings (pillow blocks), drive and driven pulleys, and 168 plucking fingers. The fingers do not come installed, you will have to do that yourself.

V-Belt Pulley, Fixed Bore, Bore Dia. 5/8 In., Fits Shaft Dia. 5/8 In., No Bushing Required, Outside Dia.

NEW Multiquip EM901074 Drive Pulley for EM700 Mixer with Honda Engine. 4" OD X 1-1/8" Bore. Pulley is New Old Stock.

Used 24" Norton Clipper Walk Behind 20HP Mid Range Self Propelled C2024SS Flat Saw The Norton Clipper C20 series of self-propelled flat saws are manufactured with an uncomplicated reinforced frame design to withstand the harshness of job cutting requirements on mid-sized jobs. Blade capabilities of 16", 20" or 24". The self-propelled hydrostatic transmission and the 4-V belt drive transfers maximum power to the blade shaft for ease of operation and durable performance.

vintage barn find new way air cooled gas engine. has good compression and spark (bosh magneto). stored indoors since last time run.

Very good condition,1-7/8 bore.Was told its a Rockwood?

YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 5"OD X 3 1/2"FACE WERE BELT RUNS X 1 1/8" BORE.SET SCREW AND KEYWAY. THIS PULLEY CAN BE USED IN MANY WAYS AND IF YOU NEED A PULLEY THIS SIZE OD X FACE BUT IN A DIFFERENT BORE JUST LET US KNOW WE CAN MAKE ANY SIZE.(MAY TAKE 3 TO 5 DAYS FOR A ORDER WE DONT HAVE IN STOCK) IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=224046&itembgcolor=0xFFFFFF&bordercolor=0x000000&storewindowbgcolor=0xb8d6b6&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&stripcolor=0x516bc6&auctionclosemessagecolor=0xff0000&emptyboxmessagecolor=0xFFFFFF&buttovercolor=0x660000&buttoutcolor=0x00000AA&searchtitlecolor=0xFFFFFF&searchbuttbgcolor=0xc0c0c0&searchbuttt

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=224046&itembgcolor=0xFFFFFF&bordercolor=0x000000&storewindowbgcolor=0xb8d6b6&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&stripcolor=0x516bc6&auctionclosemessagecolor=0xff0000&emptyboxme

up for sale an old paper puley with 5/8 bore in great shape with set screw

Ne

Martin 20H100 Timing Pulley Sprocket Sheave 1" Wide Belt 7/8" Bore Box not in good shapeboxed wrong has 3/4" Bore.part # is probably wrong. Scot @ 770-633-8788