1 1/2 shaft for sale, brand-new and used.

Up for sale is a new TRW brand 6"X1" medium 46 grit grinding wheel. It is made for a 1" shaft and comes with 3/4", 5/8", and 1/2" adapters. It was in a sealed box, which I opened to verify and photo.

You are bidding on a lot of two (2) New 3M Mounted Flap Wheels, 60 Grit x 2"Dia. with a 1/4" Dia. Shank.

A lot of 9 pieces shaft collet . The shaft size 3/8"X3/8" 2pcs. 1/4" X 1/4" 1pcs.

886 Bit is 3 3/4" long. Shaft 2" long. Smallest cutting diameter is 51/64" or .8 inch measured.

Up for auction mate punch and die 1 sets (USED) good shape regular use,Rectangular .692 X .756" +.010 Sizes SHAFT 15/16" DIE O.D 2.25"For more info and conditons pleas look at the picture's. Any questions feel free to ask Tank You..

L&I Reamer .983 straight shaft 10 1/2" Long x 7/8" Shaft If you have any questions, please contact Frank at 856-491-0637 or frank@fjb.com You may be interested in other Industrial Equipment we have listed on Ebay. Click the link below to go into our Ebay store and view items. When in the Store, Be sure and sign up for our Newletter that sends you our new listings automatically.

End Mill This is a Fargo 3/8-18 NPSF HSG 4 Flute Pipe Tap Lightly Used. The tap appears to have been lighlty used by the previous owner and shows some light scratching around the shaft and some oil / discoloration on the tap end. Overall the tap appears in very good condition and none of the small imperfections should impact the performance of the product.

Offered is a new old stock Weldon 82 degree countersink. For 1/2 inch screws with a 1/2 inch diameter shaft. Part number CS 16-1.

2 each 2- flute USA carbide 7/32" end mill 1/4" shaft L342109 USA (( Location

This auction is only for the Quill, Spindle, 1/2" Drill Chuck For A Walker Turner Radial Drill Press.The photo of the drill press is only to show which model it came from.DRILL PRESS NOT INCLUDEDQuill Diameter 1-13/16", The od of the spline shaft is 5/8".The drill chuck has been welded on to the spindle. Please visit our website, lostcreekmachine.com

Made in the U.S.A. by Elliott Company This is a roller burnisher in good condition. Model Number: 4300-.421-2B-R Specifications: Burnishing Diameter: 0.421" (adjustable 0.020" according to Elliott) Length of Shaft: 2.6" Mounting Shank: Straight, 3/8" diameter

James Nasmyth: An Autobiography, edited by Samuel Smiles, originally published by Harper & Brothers, new York, NY, 1884. Reprinted by Lindsay Publications, Bradley, Ill., 1989. 4 x 7 paperback, xviii + 461 pages.

This appears to be a threading tool holder of unknown manufacture. One surface of the shaft has been milled and there are no markings. The tool appears to be a 30 degree threading tool.

here is a nice Albrecht Keyless chuck on a straight shaft. 0-3/8 or 0-10mm. snug, no play.

2 mandrels and a cylinder. Since I have not had them hooked to a motor, I am selling as-is. Craftsman mandrel with 3/8" V belt & pulley wheel.

TAPERED ARBOR MANDREL - THREADED MANDREL SCREW THREAD - 1/4" SHAFT 6-PCS