1 1/2 shaft for sale, brand-new and used.

Steel 17-1/2" Shaft Concrete Mixing Blade Inventory #1144 DESCRIPTION The steel mixing blade is in rough condition. It was cleaned with a dremel tool and most of the concrete was removed. The screws that hold the blades could not be cleaned.

FALK 4723298 SHIM GASKET KIT SEAL RING KIT FOR HMX HMH MIXER SHAFT 2.00/2.25" - NEW Click Image To View Full Size

You are bidding on a 2-3/4" TG&P 316 Stainless Steel Shaft 2-5/8 inches long With 2 Center Drilled holes in each end .It has been Turned, Ground & polished to 2-3/4 OD 2.7500...I am a Machinet and made this shaft...S/H.. $5.85

You are bidding on a 1" 316 Stainless Steel Idler Shaft 8-1/2 inches long With 1 key 2" long in the center ...I am a Machinist and made this shaft...S/H.. $5.85

This shaft came from a wide format printer; The diameter of the shaft is 23mm. The smaller dia. at the ends is 4mm.

Semitool Rotor Mounting Plate, 4 Bolt, Model ST240, Straight Shaft Description: Plate, Rotor Mounting, 4 Bolt, for use with Semitool ST-240; Straight Shaft Rotor drive plate is 8.5 in diameter. This type drive plate has a straight shaft with locating pin and no tapper and will work with straight shaft motors. Check Out: *Purchase: Making purchases is easy and simple.

Semitool Rotor Mounting Plate, 4 Bolt, Model ST260-280, Straight Shaft Description: Plate, Rotor Mounting, 4 Bolt, for use with Semitool ST-260-280; Straight Shaft Rotor drive plate is 9.0 in diameter. The hole dimensions going from 12 o'clock to 6 o'clock are 7.5". This type drive plate has a straight shaft with locating pin, no tapper and will work with straight shaft or step shaft motors.

2022UD6G.3.36 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for a Lot of Four (4) Motors. You may bid / buy any number of lots, up to the total quantity available above.

CRAFTSMAN FLEX SHAFT 239.26331 FLEXIBLE DRIVE CABLE Good condition, spins freely. Connect this to any 1/2 shaft motor (on the drive end). The driven end has common 1/2" x 20 tpi threads (nice shape) for use with many drill chucks (I have a DeWalt keyless chuck on mine).

2016UD6G.74 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

Up to 2 80/20 5750 Double Shaft Blank 1 1/2" Diameter Mounting Plates You are bidding on up to 2 80/20 5750 Double Shaft Blank 1 1/2" Diameter Mounting Plates. Each bid is for ONE Plate.

14",15", 16", 18" BAND SAW BALL BEARING BLADE GUIDE SUPPORT BRACKET UPGRADE TWO PIECE SET Upper or Lower! Replace your worn out or broken Blade Guides with ours. Fits ACCURA, ROCKWELL, DELTA, Most GRIZZLY, JET, BUFFALO, AMT, CENTRAL, CHAMPION, RIDGID, CRAFTSMAN, DAYTON, ENCO, STAR, SHOP FOX, SUNHILL, TRANSPOWER, BRIDGEWOOD etc.

1-5/8" Bore Clamp Type Shaft collar Stainless Steel 11/16" wide 1/2" wall Thank you for looking at this item .Please take a minute to browse our store to see what other treasures we might have this week. I will combine shipping when beneficial . Be sure to view all pictures and ask any questions before you bid.

Drive Shaft 1" x 12" 5131-5068-000 GEA w/ Keyed Key Way NEW