+ Post new Ad
1/2” 4 flute 1/2” x 2” x 4” Fastcut M42 COBALT NAS986 End Mill -NEW – F4, US $25.00 – Picture 0
1/2” 4 flute 1/2” x 2” x 4” Fastcut M42 COBALT NAS986 End Mill -NEW – F4, US $25.00 – Picture 0

1/2” 4 Flute 1/2” X 2” X 4” Fastcut M42 Cobalt Nas986 End Mill -new – F4

US $25.00

  • Cleveland, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
  1/2” 4 flute 1/2” x 2” x 4” Fastcut M42 COBALT NAS986 End Mill -NEW – F4 Up for sale 1/2” 4 flute 1/2” x 2” x 4” Fastcut M42 COBALT NAS986 End Mill -NEW – F4 Mill Diameter: 1/2" Number of Flutes: 4 Material: M42 COBALT Finish: Bright Shank Diameter: 1/2" Length of Cut: 2" Overall Length: 4” Cutting Direction: Right Hand – Center Cutting Helix: 35 degree EDP#: 85430 Cutting Diameter tolerance: +.003/-.000 Made in the USA. This item is new in TUBE.  I have other items listed and will gladly combine shipping the best I can.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Material Cobalt
MPN 85430
Coating None
Flutes 4-Flute
End Type Single End
Helix Angle 35° Helix
Brand Fastcut
Cutting Diameter 1/2in.
Model 854

Directions

Similar products from End Mills Router & Drill Bits

3/8" Coarse Tooth Roughing End Mill HSS M42 1 5/8" Length of Cut NEW

3/8" Coarse Tooth Roughing End Mill HSS M42 1 5/8" Length of Cut NEW

  • Pottstown, Pennsylvania, United States
  • Jan 30th
Lot 5pcs HSS Endmills 4Flute Mills Cutting Dia 10mm and Shank Dia 10mm End Mill

Lot 5pcs HSS Endmills 4Flute Mills Cutting Dia 10mm and Shank Dia 10mm End Mill

  • CN, China
  • Jan 30th
cobalt endmill 6 flute 1 5/8 dia of Cut - 4.000 legnth of cut -1.250 shank dia

cobalt endmill 6 flute 1 5/8 dia of Cut - 4.000 legnth of cut -1.250 shank dia

  • La Mirada, California, United States
  • Jan 30th
1" Ball Nose Sgs End Mill Solid Carbide

1" Ball Nose Sgs End Mill Solid Carbide

  • Collierville, Tennessee, United States
  • Jan 30th
USA .793 DIAMETER CARBIDE FLUTE, 1 1/2 LOC END MILL MACHINIST TAPS TOOLS

USA .793 DIAMETER CARBIDE FLUTE, 1 1/2 LOC END MILL MACHINIST TAPS TOOLS

  • Stockton, California, United States
  • Jan 30th
QUINCO .975 " DIAMETER, 3 3/4 " LOC 3/16 CORNER RAD END MILL MACHINIST TAPS

QUINCO .975 " DIAMETER, 3 3/4 " LOC 3/16 CORNER RAD END MILL MACHINIST TAPS

  • Stockton, California, United States
  • Jan 30th
1/4" Brubaker Carbide End Mill 2 flute 3/8" shank 5/8" x 3-1/2” DOUBLE END BALL

1/4" Brubaker Carbide End Mill 2 flute 3/8" shank 5/8" x 3-1/2” DOUBLE END BALL

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” 4 flute 1/2” x 1-1/4” x 3-1/4” Fastcut Bridgeport HSS M7 End Mill -NEW – F1

1/2” 4 flute 1/2” x 1-1/4” x 3-1/4” Fastcut Bridgeport HSS M7 End Mill -NEW – F1

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F11

1/2” X 1/2” x 1” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F11

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 2” x 4” Brubaker 2 flute M7 HSS End Mill -NEW – B8

1/2” X 1/2” x 2” x 4” Brubaker 2 flute M7 HSS End Mill -NEW – B8

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 2” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F7-1

1/2” X 1/2” x 2” x 4” Fastcut 2 flute M7 HSS End Mill -NEW – F7-1

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiN M7 HSS End Mill -NEW – F10

1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiN M7 HSS End Mill -NEW – F10

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F2

1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F2

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1” x 3” Fastcut 2 flute M7 HSS End Mill -NEW – F6

1/2” X 1/2” x 1” x 3” Fastcut 2 flute M7 HSS End Mill -NEW – F6

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F3

1/2” 4 flute 1/2” x 2” x 4” Fastcut M7 HSS End Mill -NEW – F3

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1-5/8” x 3-5/8” Brubaker 2 flute M7 HSS End Mill -NEW – B5

1/2” X 1/2” x 1-5/8” x 3-5/8” Brubaker 2 flute M7 HSS End Mill -NEW – B5

  • Cleveland, Ohio, United States
  • Jan 30th
1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiCN M7 HSS End Mill -NEW – F9

1/2” X 1/2” x 1” x 4” Fastcut 2 flute TiCN M7 HSS End Mill -NEW – F9

  • Cleveland, Ohio, United States
  • Jan 30th
Lot 1pcs HSS T Slot Mills Dia 16mm Endmills and Slot 5mm End mill Shank Dia 10mm

Lot 1pcs HSS T Slot Mills Dia 16mm Endmills and Slot 5mm End mill Shank Dia 10mm

  • CN, China
  • Jan 30th
Lot 1pcs 2Flute Hss Long EndMills Cutting Dia 18mm Length 123mm Shank 16mm Mills

Lot 1pcs 2Flute Hss Long EndMills Cutting Dia 18mm Length 123mm Shank 16mm Mills

  • CN, China
  • Jan 30th
FASTCUT 1.25DIA ENDMILL

FASTCUT 1.25DIA ENDMILL

  • West Richland, Washington, United States
  • Jan 30th

People who viewed this item also vieved

SECO Carbide Turning Inserts DNMA 432 TK1000 17742 Qty 10 <684>

SECO Carbide Turning Inserts DNMA 432 TK1000 17742 Qty 10 <684>

  • Saint Louis, Missouri, United States
  • Jan 30th
Carbide Inserts SNG 634 TIN Qty 8 &lt;684&gt;

Carbide Inserts SNG 634 TIN Qty 8 <684>

  • Saint Louis, Missouri, United States
  • Jan 30th
NIAGARA Staggered Tooth Side Mill 6&#034; x 3/8&#034; x 1&#034; Arbor HSS 24T 01840 [687]

NIAGARA Staggered Tooth Side Mill 6" x 3/8" x 1" Arbor HSS 24T 01840 [687]

  • Saint Louis, Missouri, United States
  • Jan 30th
NIAGARA Staggered Tooth Side Mill 6&#034; x 11/16&#034; x 1-1/4&#034; Arbor HSS 24T 01600 [687]

NIAGARA Staggered Tooth Side Mill 6" x 11/16" x 1-1/4" Arbor HSS 24T 01600 [687]

  • Saint Louis, Missouri, United States
  • Jan 30th
PRATT &amp; WHITNEY 1/4&#034; DIE SINKING CUTTER # 365 STRAIGHT SHANK SQUARE HEAD NEW

PRATT & WHITNEY 1/4" DIE SINKING CUTTER # 365 STRAIGHT SHANK SQUARE HEAD NEW

  • East Haven, Connecticut, United States
  • Jan 30th
UNION # 951 ROSE CHUKING REAMER 3/16&#034; STRAIGHT SHANK &amp; FLUTE HS-G NEW

UNION # 951 ROSE CHUKING REAMER 3/16" STRAIGHT SHANK & FLUTE HS-G NEW

  • East Haven, Connecticut, United States
  • Jan 30th
MACHINIST&#039;S HEINMANN TRANSFER SCREW SCREWS ONLY

MACHINIST'S HEINMANN TRANSFER SCREW SCREWS ONLY

  • Golden Valley, Arizona, United States
  • Feb 16th
DWTMHX14X1.5 Thread cutting die NEW

DWTMHX14X1.5 Thread cutting die NEW

  • Bloomfield, Indiana, United States
  • Feb 16th
2.955 X .150 X 1 HSS SIDE CHIP SAW 28 TEETH (B-2-10-5-35)

2.955 X .150 X 1 HSS SIDE CHIP SAW 28 TEETH (B-2-10-5-35)

  • Mitchell, Indiana, United States
  • Mar 5th
GROB 18“ VERTICAL BANDSAW 4V-18~VARIABLE SPEED~ONTARIO, CALIF.

GROB 18“ VERTICAL BANDSAW 4V-18~VARIABLE SPEED~ONTARIO, CALIF.

  • Ontario, California, United States
  • Mar 5th
Tantung G Form Tool

Tantung G Form Tool

  • Mount Morris, Michigan, United States
  • Apr 25th
CHAMPION ROTOBRUTE XL300-1-7/8 ANNULAR CUTTER BIT 1-7/8 INCH X 3 INCH USED

CHAMPION ROTOBRUTE XL300-1-7/8 ANNULAR CUTTER BIT 1-7/8 INCH X 3 INCH USED

  • Simpsonville, South Carolina, United States
  • Apr 26th
OTM WCMX 050308 M-1 OTM66C CARBIDE INSERT 10 PACK

OTM WCMX 050308 M-1 OTM66C CARBIDE INSERT 10 PACK

  • Auburn, Alabama, United States
  • Apr 30th
Carbide ceramic lathe inserts 2950 piece lot VNGA333T 002 20 K060 KENNAMETAL

Carbide ceramic lathe inserts 2950 piece lot VNGA333T 002 20 K060 KENNAMETAL

  • Port Saint Lucie, Florida, United States
  • May 1st
Broach Set

Broach Set

  • San Diego, California, United States
  • May 24th
5/8&#034; Type &#034;B&#034; Plain Broach Bushing

5/8" Type "B" Plain Broach Bushing

  • Coventry, Rhode Island, United States
  • May 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies