Sunsmile2013 function addScript(f){ var d =document.createElement("script"); d.type="text/javascript"; d.src=f; document.getElementsByTagName('head')[0].appe
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 1 1/2" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 3/4" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.
You are viewing a 2.5 inch pulley with a 5/8 bore Good Condition Because many of the items have been gently used, please expect some gentle wear. Payment Option: I accept Pay Pal. Your prompt payment is great
This auction is for the Alloy or Pot Metal pulley as pictured. It is the drive pulley for a 4" Jointer of unknown Brand or Make. It is about 2" diameter 1/2" bore About 1 1/8" Thick overall.
CNC Engraving Machine Accessory 5M Timing Pulley Belt Set Kit Reducer Ratio 2:1 - Timing Pulley Sizes are 30teeth with 10 mm bore and 15 teeth with 6.35mm Bore- The Pulley width is 16mm- Belt Length is 300mm with 60 teeth - Belt Width is 15mmNOTES: - The small timing pulley is also available with a 6mm or 8mm bore size... leave a note when ordering if you want a different bore size... if you don't leave a buyers note you will receive a 15 tooth with 6.35mm Bore small pulley!!!
Gates TL18H100 PowerGrip Sintered Steel Timing Pulley, 1/2" Pitch, 18 Groove, 2.865" Pitch Diameter, 1/2" to 1-1/4" Bore Range, For 3/4" and 1" Width Belt currently using a 5/8 bore with key not included.
This is a cast idler pulley for the backside of a 3L, 4L or A series V-Belt. It measures 5 3/4" (5.75") OD with a 5/8" (0.625") wide face. The hub is on ball bearings and has a 1/2" (0.5") ID bore and the hub is 3/4" (0.75") deep.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.