1 2 hose clamp for sale, brand-new and used.

(one) 4" x 51 1/2 " hot air blower hose , Gates RE2608 . This includes (1) 51 1/2 " hose section(not in photo) and (1) 11" section with the sanitary fittings . $25 shipping in the continental U.S.

Description Plasma Cutter Specs: 208/220vac 50/60HZ Input Single Phase 1PH 50amp cut draws 25Amps 250V No Load Voltage Plasma Cutting: 3" Per minute @ 1" Steel (Severance Cut) 7" Per minute @ 3/4" Thick Steel 17" Per minute @ 1/2" Thick Steel Power Specs: Power Factor 0.93 100% Duty cycle (cut time) at 40amp cut 60% Duty cycle at 50amp cut setting ISO9002 CE, CCC Air requirements: 60-75psi @ 4.5cfm You will have to provide 220V Plug and air supply. What is Included?

About us Shipping Payment

About us Shipping Payment

About us Shipping Payment

Fixed Mount Hose Pipe Clip Clamp Holder for AD54.5 Corrugated Conduit Bellows

39" x 24" (1000mm x 620mm) Single Head Laser Engraving and Cutting System, Servo Motor, Available in the USA With Electric Up and Down Lifting Table, Rotary Fixture, 130W Laser Tube and Servo Motor. We support Spare Part - FDA - Warranty 2 years.

51" x 35" (1300mm x 900mm) Double Heads Laser Engraving and Cutting System, Servo Motor, Available in the USA With Electric Up and Down Lifting Table, Rotary Fixture, 130W Laser Tube and Servo Motor. We support Spare Part - FDA - Warranty 2 years.

31" x 20" Single Head Laser Engraving and Cutting System, with Electric Up and Down Lifting Table, Available in the USA L

4"/ 5" Dust shroud kit fits all major brands angle grinders A universal and effective dust shroud. Fit just about any grinder / polisher including Makita, Hitachi, Bosch and more, with a collar diameter of 44mm -64mm. Install and remove in seconds with a simple hose clamp attachment.

Used, minimal scrapes and scratches from normal use also owners name etched on pliers. Look at pictures before bidding.

THIS LISTING IS FOR A SPX 15 TON HYDRAULIC C-CLAMP. ITS BEEN TESTED AND INSPECTED. THE UNIT IS IN GREAT CONDITION AND WORKS LIKE IT SHOULD JAW OPENING 2-7/8" JAW DEEP 3" 15 TON RAM 10,000 PSI OVERALL LENGTH 12" UNIT WEIGHT 19.1 POUNDS SINGLE ACTING W/ SPRING RETURN 15 TON CYLINDER 1/4' HYDRAULIC INLET PORT.

TAPMATIC 30 TC/DC Reversing Tapping Head w/1/2" Shank - Tap 0 to 1/4" Swiss Made With a 6JT x 1/2" diameter shank for a collet. As noted above, the plastic knurled collar is cracked. The guys had a hose clamp on it to keep it from moving.

Maximum 4 types of Detergent and Sanitizing products dispensed by one unit. (2) 4GPM for mop bucket (2) 1GPM for spray bottle Mixing Rate: 1:10 to 1:512, adjusted by 21pcs metering tips that included Durable stainless steel combinate Build-in ASSE5001B Backflow Provent Components Accessory included: chemical pick-up tubing, metering tip pack, foot check valves, tubing stiffeners, drilled caps, water intake hose, screw/anchor pack, hose clamp. metering tip usage chart, product instruction sheet.