LOT OF 7 BRASS DRAIN COCK VALVES 2 BIB NOSE VALVES 1/8" PIPE THREAD NOS 1 STRAIGHT VALVE 1/4" PIPE THREAD NOS 1 BIB NOSE VALVE 1/4" PIPE THREAD (OLD) 1 T HANDLE VALVE 1/4" PIPE THREAD 1 STRAIGHT VALVE 3/8" PIPE THREAD 1 QUARTER TURN VALVE 1/4" PIPE TO HOSE CHECK OUT THE PHOTOS THANK YOU FOR YOUR TIME AND BIDS
This is a very hard to find original fuel mixer or carburetor for a Root and Vandervoort gas engine. It is in excellent used condition as can be seen. There are no cracks, breaks, or repairs of any kind.
This is a very hard to find original exhaust rocker arm for a Waterloo hit and miss or throttle governed gas engine. It measures about 5 3/8 inches long and 1 5/8 inches "tall" with a 1/2 inch hole in it and is in excellent used condition. There are no cracks, breaks, or repairs of any kind.
Very nice brass valve 1-3/4" long, 2" tall and 7/16" outside of threads. See all pictures for condition. Air blows through and when shut it does not blow through.
Very nice valve, Lever open air blows through, lever closed, air does not. 2-1/8" long, and outside threads are 3/8". the right angle end is 1/2" outside.
Antique oiler - this is panel mounted pressure oiler which is set up for 2 oil lines. The first about 1/4 of travel of the plunger opens a valve, then the rest of the stroke injects oil. The filler cap is tethered to the oiler using a small 'ball-chain'.
PLEASE READ DESCRIPTIONS AND AFTER PURCHASE PLEASE DO NOT LEAVE 1'S OR 2'S ON SELLER RATING, IF YOU ARE NOT HAPPY WITH A PURCHASE PLEASE CONTACT ME FIRST. 3 Vintage lunkenheimer inline shut off valves. I put them in a vice and opened valve with wrench, a little stiff but opened .
PLEASE READ DESCRIPTIONS AND AFTER PURCHASE PLEASE DO NOT LEAVE 1'S OR 2'S ON SELLER RATING, IF YOU ARE NOT HAPPY WITH A PURCHASE PLEASE CONTACT ME FIRST. 2 Vintage lunkenheimer 1/2 150 inline shut off valves. I put them in a vice and opened valve with wrench.
PLEASE READ DESCRIPTIONS AND AFTER PURCHASE PLEASE DO NOT LEAVE 1'S OR 2'S ON SELLER RATING, IF YOU ARE NOT HAPPY WITH A PURCHASE PLEASE CONTACT ME FIRST. 1 Vintage lunkenheimer 1/2 150 inline shut off valves. I put them in a vice and opened valve with wrench.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.