Here is my double clothes dryer cord extension cord. It allows you a little more reach to get power from a 3 prong receptacle for a machine. Use on welders, plasma cutters, air compressor, electric vehicle clothes dryers.
Title of your page goes here 1941 MACHINE SHOP TOOLS LATHE MILL JIGS FIXTURES FOUNDRY GEAR CUTTING This is a 568 page, 5 3/4” x 8 1/2”, hardcover book titled The New Encyclopedia of Machine Shop Practice. The book was edited by George W. Barnwell Professor of Production Practice Stevens Institute of Technology and was copyrighted and published in 1941.
3HP 220V Single phase or three phase over arm pin router by Woodtek. Very little use, it is like new condition. See specs below This will ship by common carrier (Truck).
Automatic Registration Mark Sensor (ARMS) & Dual Axis Correction ARMS automatically seeks for the first corner mark to get the job started faster. 4 Point Marks—Dual Axis Correction adjusts the cutline to compensate for minor print distortions. Use intermediate segment area marks to compensate for printer skewing on long prints.
Description Plasma Cutter Specs: 208/220vac 50/60HZ Input Single Phase 1PH 50amp cut draws 25Amps 250V No Load Voltage Plasma Cutting: 3" Per minute @ 1" Steel (Severance Cut) 7" Per minute @ 3/4" Thick Steel 17" Per minute @ 1/2" Thick Steel Power Specs: Power Factor 0.93 100% Duty cycle (cut time) at 40amp cut 60% Duty cycle at 50amp cut setting ISO9002 CE, CCC Air requirements: 60-75psi @ 4.5cfm You will have to provide 220V Plug and air supply. What is Included?
The Thermal Dynamics Cutmaster 82 Plasma System (1-1130-1) packs a whole lot of punch while only weighing 43 lbs. That kind of portable power is rare in the market place. The Cutmaster series has been designed with the idea that recommended cut capacity should also be the true cut capacity.
39" x 24" (1000mm x 620mm) Single Head Laser Engraving and Cutting System, Servo Motor, Available in the USA With Electric Up and Down Lifting Table, Rotary Fixture, 130W Laser Tube and Servo Motor. We support Spare Part - FDA - Warranty 2 years.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
