Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
How to Run a Lathe: How to Erect, Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19, by O’BRIEN BROTHERS J.J. O’Brien and M.W.
INDEXABLE TOOLHOLDER CONDITION = NEW INDEXABLE TOOLHOLDER MANUFACTURER = LMT THIS TOOLHOLDER IS A ON EDGE THREADING TOOLHOLDER FOR TNMA OR TNMC-32 STYLE INSERTS COOLANT THRU THERE IS AN INLET (COOLANT HOLE) LOCATED ON BOTTOM OF SHANK OFFSET FROM WERE THE INSERT WOULD SIT (ON TOP) THAT GOES TO TOP OF HOLDER THE INLET IS 1/8-27 NPT P
PNEUMATIC SWING CLAMP, SMC MODEL MK2B40-20R PORTS, G-1/8, SAME AS BRITISH STANDARD PIPE THREADS BORE, 40 MM CLAMPING STROKE, 20 MM ROTATION, CLOCKWISE THREAD IN ROD, M10X1.5 MOUNTING, THREADED HOLES ON BOTH ENDS MAX AIR PRESSURE, 145 PSI / 1.0 MPa
YOU ARE BUYING ONE LOT OF 5 SANITARY STAINLESS STEEL CLAMPS FOR 1/2" PIPE 1" FLANGE OD. THESE CLAMPS FIT A PIPE SIZE OF 1/2" WITH A FLANGE OUTSIDE DIAMETER OF 1". MIXED MANUFACTURE.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
