1 5 hp blower motor for sale, brand-new and used.

This unit was used for demonstration has less than 10 hours use, very clean Cyclonic action separates the heavy dust particles from the fine particles and drops them into the 55-gallon steel drum. The fine dust travels past the 15-1/2" diameter impeller and is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size.

Grieve Model 333 Large Capacity Electric Batch Oven You can easily convert this oven from 3 phase to to Single Phase Grieve Industrial helps people do that all the time if you are not handy at doing it yourself. Also, you can cheaply upgrade yourself to modern digital pid controls over mfg analog controls. Used industrial batch oven.

NEW A.O. Smith DBL4404 1/10 HP 1550 RPM 3 Speed 115 Volts 3.5-1.7-1.4 Amps 42Y Frame sleeve Bearing Direct Drive Blower Motor As shown. Box is slightly worn, been stored in my garage for a bit, but motor is new.

GE 1/6 HP MotorModel# 5KSP29HK1/6HP 1050 RPM115 Volt 5 Amp. 60Hz. single phase Has an approx.

AO Smith Motor 481 5-5/8" Diameter Stock Motors Heating & Air Conditioning Features:  Continuous Duty, Air Over Mechanically Reversible Shaded Pole Sleeve Bearing Thermally Protected 60 Hz Applications: Condenser Fans Direct Drive Blower OEM replacement for Lennox, Luxaire, Chrysler, Johnson, Armstrong, Heil Quaker, Miller, Lear Siegler, Tappan, Modernaire and other air conditioning and heating applications.

NEW!!

This is a good, lightly used, Carrier, Bryant, Payne, OEM, 3/4 HP furnace blower motor. Carrier part # HC45AE115A, HC45AE115. If you need this motor you may need it fast.

150 HP DC Electric Motor, 1750/2000 RPM, LC3212ATZ Frame, 500 Volt Armature, 300 Volt Field, Stabilized Shunt, Reliance Electric, Type TR, Insulation Class F, Drip Proof, Forced Vent, Ball Bearing, W/ Tachometer / Encoder Provisions. The motor is currently offered as Electrically OK (EOK). This means that the motor will be completely tested electrically and certified to be electrically sound and operational before it ships.

Purpose and Capabilities The aircraft generator test stand is designed to test the operation and performance of 28-volt and 120-volt d-c genera-tors and 120-volt, 350 to l00 hertz, single-phase, a-c generators which are used in aircraft electrical Systems. Skids are provided on the frame to permit movement of the unit from one site to another. The unit is manufactured in accordance with S

100 HP DC Electric Motor, 1750/2000 RPM, 368AT Frame, 500 Volt Armature, 300/150 Volt Field, Stab. Shunt, Baldor, Insulation Class F, Drip Proof, Forced Vent, Ball Bearing, W/ Tachometer / Encoder Provisions. The motor is currently offered as Electrically OK (EOK).

echnical Specs Item Direct Drive Blower Motor Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Design Permanent Split Capacitor Motor Enclosure Design Open Air-Over HP 1/3 Nameplate RPM 1075 Voltage 208-230 Full Load Amps 2.6 Hz 60 Phase 1 Frame 48Y Motor Service Factor 1.00 Max. Ambient Temp.

AMERICAN DRYER AUTOMATIC HAND DRYER, FLAME RETARDANT ABS, 120V WHITE GX1 Brand new in box

Specifications Color: orange Voltage: AC 115V 60Hz AMP: 15 Motor : 1.0 HP RPM : 1100/1300/1600 Air Volume: 4200 CFM Power cord length: 15 FT Size: 18.5" W x 17.7" L x 17.3" H Weight: about 36 lbs Product Details

EDIC's Aqua Dri hosts a series of exclusive features that put it far ahead of the pack and make it indispensable for quick drying of carpet and hard floors. The Aqua Dri™'s unique body design makes it easy to stack for storage or transport. The Aqua Dri™ offers three-speed drying with a 1/2 HP motor and 2400 CFM, and can be easily adjusted to four different positions for drying carpets, furniture, curtains, ceilings- you name it!