1 in bolts for sale, brand-new and used.

Features: Three Styles Meet Every Installation Need, Heavy Duty U-bolts, Hex Bolts And Hex Nuts, Capable Of Supporting Heavy Loads, Hot Dipped/mechanically Galvanized Finish, Application: Designed To Secure Rmc, Imc Or Emt Across, Parallelor Perpendicular To Channel, Beam And Angle Supports., Standard: Ul, Csa, Cablesize: 2.5in, Material: Clamps: Malleable Iron, Nuts And Bolts: Platt Cat:APPPC250RAPlatt Item:170141UPC: 781381288378

This listing is for 10 pcs. Zinc Plated Flange 6mm Hex Bolts & Nuts M6 x 1.0 Metric Thread Body Hardware Each bolt is 5/8" long (threaded length). Comes with 10x Bolts, 10x lock washers, 10x flat washers, 10x nuts These bolts and nuts require a 10mm wrench or socket to tighten.

This listing is for 10 pcs. Zinc Plated 6mm (10mm Hex) Sems Bolts Captive Washers M6 X 1 Metric Thread Dog Point Car Body Hardware Each bolt is 1-3/16" long (Bottom of Head to Tip). Comes with 10x Bolts, 10x captive lock washers and 10x captive flat washers These bolts and nuts require a 10mm wrench or socket to tighten.

This listing is for 10 pcs. Zinc 6mm Hex Dog Point SEMS 5/8" Bolts & Fender Body M6 x 1.0 Metric Thread Each bolt is 5/8" long (Bottom of Head to Tip). Comes with 10x Bolts, 10x captive lock washers and 10x captive flat washers These bolts and nuts require a 10mm wrench or socket or Phillips heads screw driver to tighten.

This listing is for 10 pcs. Zinc Plated Flange 8mm (12mm Hex) Bolts & Nuts M8 X 1.25 Metric Threaded Body Hardware Each bolt is 5/8" long (threaded length). Comes with 10x Bolts, 10x lock washers, 10x flat washers, 10x nuts These bolts and nuts require a 12mm wrench or socket to tighten.

This listing is for 5 pcs. Zinc Plated Flange 10mm Diameter 14mm Hex Wrench Bolts With Nuts M10 x 1.25 Metric Thread. Each bolt is 1" long (threaded length).

You are bidding on TEN (10) A325 BOLTS, TEN (10) NUTS, AND TEN (10) WASHERS. These bolts have A325 and SL on the head. The length of the bolts is 1 3/4".

Genuine U.S. Military Issue Surplus   Aluminum Hub with Shoulder Bolts   P/N: 11659919 P/N: 11659909 On the hub it has the following casting number.... K A E 11659909   The overall size is 4" x 16 1/2" Outer Diameter (approximately) There are two different sizes of shoulder bolts.

NEW!!! 1/4-20 X 1/2 Inch Grade 5 Hex Head Bolts. These are Zinc Plated and Listing includes 100 bolts and 100+ Grade 5 washers.

Genuine U.S. Military Issue Surplus   Lot of 2 - Raytheon  Tee Head Stainless Steel Bolts P/N: 4023519-0001 NSN: 5306-00-846-1088  Characteristics Thread Class: 2A Thread Direction: Right-hand Thread Length:   0.750 inches minimum and 0.780 inches maximum Fastener Length: 1.471 inches minimum and 1.501 inches maximum Head Style:     Tee no.

400 -- PARTIAL THREADED BOLTS 400 -- 3/8 - 16 x 3-1/2" BUYER PAYS ACTUAL SHIPPING. I USE USPS FLAT RATE BOXES ALWAYS HAPPY T0 COMBINE ITEMS TO SAVE ON SHIPPING. NEW YORK STATE RESIDENTS MUST PAY 7% SALES TAX.

296 HEX HEAD BOLTS SIX SIZES ZINC COATED 36 -- 3/8" -16 X 4" 20-- 3/8 - 16 X 3" 100-- 3/8 - 16 X 3 1/2" 100 - 5/16 - 18 X 3 1/2" 20 -- 3/8" - 16 X 2-1/2" 20 -- 1/4 - 20 X 3-1`/2" BUYER PAYS ACTUAL SHIPPING. I USE USPS FLAT RATE BOXES ALWAYS HAPPY T0 COMBINE ITEMS TO SAVE ON SHIPPING.

Five pounds of assorted nuts, bolts, screws, hinges, and other assorted hardware. Shipping weight is about 5 1/2 pounds. Winning bidder pays $12.65 in USA ($42.25 to Canada) for shipping in a flat rate priority mailing box from zip code 80303.

Brass Hex Bolt, Plain Finish, Hex Head, External Hex Drive, 1-1/4" Length, 1/4"-20 Threads (Pack of 5) Hex bolts have a chamfered point to aid insertion into a tapped hole or nut. Length is measured from under the head. Brass is rust proof, corrosion resistant and polishes to a rich, golden color.

DiversiTech WG840730 Condenser Fan Motor 1/2 HP 208-230 VAC 1075 RPM reversibleMotor has never been used.It has been sitting in storage for a while, therefore the box is a bit frayed. This box was opened to take pictures of the item and to check contents.

*************Buy 2 get 1 FREE************** Buy 2 cd titles through the auction or fixed price format listings and during the check-out process send a message to request a free CD title of your choice. ***************************************** Want to Buy-it-now instead of waiting for this auction listing to end?

var itemNumber = window.ebayItemID ?

This listing is for two KO Lee T-bolts for the tool & cutter grinders. These are 3/8" - 16 thread and are 1 1/2" long. I believe that they are the table stop bolts.