1 in bolts for sale, brand-new and used.

This auction is for one new box of 100 dottie 3/8 bolts, please check my other auctions for more awesome deals, USA bidders only, payment expected within 2 days of auction ending, I SHIP FAST, 100% positive feedback , THANKS

Up for auction are 30 anchor bolts and nuts .....1/2" X 8" anchor bolts with nuts. These are being sold in lots of 30 (30 bolts and 30 nuts). So if you are the high bidder you will get 30 anchor bolts and 30 nuts for your bid price plus the shipping.

Up for auction are 10 anchor bolts and nuts .....1/2" X 8" anchor bolts with nuts. These are being sold in lots of 10 (10 bolts and 10 nuts). So if you are the high bidder you will get 10 anchor bolts and ten nuts for your bid price plus the shipping.

Up for sale are 50 anchor bolts and nuts .....1/2" X 8" anchor bolts with nuts. These are being sold in lots of 50 (50 bolts and 50 nuts). So if you are the high bidder you will get 50 anchor bolts and 50 nuts for your bid price plus the shipping.

(10) ten 316 Stainless Steel Bolts Threaded 5/8"x3 1/2" with nut one order comes with 10 bolts 10 nuts

This listing is for a lot of 52 new wedge anchor bolts in the size of 1/4" x 2-1/4". The bolts have never been used, but do have some minor surface issues from sitting. There are some spots of surface rust and dirt, but all the nuts thread on just fine.

18 new retaining bolts, 1/2 inch in diameter. and 6 inches long

This Ebay Item is for a lot of -3- Cold Rolled Steel Threaded Rod / bolts. Each bolt is 18" Long. The Rod / bolt is 1.25" Round.

For sale are these new brass 1/4-20 x 1 inch long brass bolts.Purchased for a project and never used. Selling for a very low price. My loss is your gain.

55pc. Set of 1/4-20 X 5" Long Toggle Bolts- 5/16" Bolt or #3 Phillips Head- 25 Bolts- 30 Toggles- These are extra long bolts for hollow drywall when using a standoff or thicker material mounting system. The head of the bolt allows for more torque and less slip than a standard slotted drive.

Offered is approximately one pound of stainless steel bolts. 3/16 inches in diameter and approximately 9/16 long . Slotted screw head Size 10 Used from industrial equipment.

LOT OF 135 NEW HEX CAP BOLTS, 5/16" X 1 1/2" GRADE 5, COARSE THREAD Bolts. They are NEW and in new condition and ready to use. Buyer prepays plus FREE US SHIPPING.

They are not used but they have been sitting around for a good while and are weathered and spotted here and there. For the record, they are 6 inches long, have hex heads and hex nuts, and are 1/2" in diameter. They are galvanized bolts and washers.

There is a total of 25 new stainless bolts 1/2"-13 x 1 3/8. I have have 2 more sets of 25 if interested. If you have any questions please feel free to ask.

C

20 count - Toggler 3/16” – 20 Snaptoggle toggle bolts and FastenalFlat Head Phillips 10 – 24 X 3 bolts Holds up to 238 lbs.* in 1/2 inch drywall Holds up to 802 lbs.* in concrete *Holding values: Per anchor with 3/16”-24 bolts Holding Values with other bolts and materials available at toggler website Specifications per Toggler Specifications BL = T + W = 1/2 ” (12 mm).

Toggler Snaptoggle, 10 Pack, 1/4"-20", BB Hollow Wall Anchors, 1/2" Head Bolts, Replaces Old Fashioned Toggle Wings, Strongest & Require The Smallest Hole, Can Be Pre-Installed Without Using A Bolt & Won't Fall Behind The Wall When The Bolt Is Removed, Solid Metal Channel Centers The Bolt Which Cannot Sag, Will Not Damage Or Break Through The Wall Even Under Vibration.

TOGGLE BOLTS FLAT HEAD 3#

(4) Four Brand New Simpson Strong-Tie HDQ8-SDS3 Hold Downs with SDS Screws. Item will be shipped as soon as payment is made. We thrive on honesty, quality, and super fast shipping.