1 muffler for sale, brand-new and used.

Call Brett At 309-261-5695 for any questions or issues with your orders. B2 shelf Gast 4AM-NRV-92 Air Motor 1.8HP, 3000 RPM, 5/8" Shaft, NEW IN BOX, DATED 2010

Proudly in Business Since 1999 • Quietest in its class • Exceptionally Low Vibration Levels •

Gasoline Power Station Model NAG7200 Characteristics: * Commercial Power Supply* Air Cooled 13 HP Gasoline Engine* Electric Start* 7200 Watt Power Factor* Circuit Breaker Protected* Low Oil Shutdown* Quiet Muffler Design* Heavy Duty Steel Frame* AVR (Automatic Voltage Regulated)* Durable Steel Gas Tank

Proto J150WP 1/2 ” Drive Air Impact Wrench. New. Never used.

A nicely restored engine with no breaks, cracks, or welds, gears are in excellent condition. Engine was restored 2 years ago with new rings and ground valves. All bearings are in excellent condition and shimmed properly.

FLOJET G551022A HEAVY DUTY SODA SYRUP PUMP OVERSTOCK from a Nat'l beverage company. BRAND NEW-NEVER USED. Shipped in factory box or open bag.

This Enerpac Pump, Air/Hydraulic PATG-1102N/1Z907 item (NEW) may not ship in original packaging.

NEW ATO Muffler Model M02 Pipe Size 1/4"

This listing is for one new 100-125 PSI piloted discharge check valve / unloader valve combo with a 1/2" JIC male flare fitting for the air inlet port. This check valve combo is made by Conrader in the U.S.A., It is an NS series valve. This valve is usually used on compressors that pump less than 20 CFM, and can be used on gas or electric compressors.

Black Ball Grip HV-200D

Ingersoll Rand PD01P-HPS-PAA-A 1/4" Non-Metallic Diaphragm Pump *Pump only, no muffler or original packaging. *owners manual pdf link at bottom of description page. Model: PD01P-HPS-PAA-A Description: 1/4" Non-Metallic Diaphragm Pump Air Operated Body Material: Polypropylene Inlet/Outlet Size: 1/4" Connection Style: NPT Air Inlet Size: 1/4" FNPT Max.

Cast iron 5-1/2" ball muffler comes threaded with 1" NPT port. This muffler is new but manufactured with period correct cast iron and fastened with plain finish square head hardware. Let it rust, paint it, or keep it oiled to match your engine.

This Is an Exact Replica Cone Style Muffler For the 2 1/2 - 3 Hp Hp Hercules, Economy, Jaeger, & Arco Hit & Miss Or Throttle Governed Gas Engines Using A 1 1/4" Pipe Thread For the Exhaust !! This is about 8 3/4" In Dia ..... 6 1/4" tall With the pipe 1 1/4 " Pipe thread......

Here is A New Reproduction Muffler for A Model 82 Maytag Gas Engine that use the Earlier - Smaller 1" Hose, This is A Very Good Cast Iron Reproduction, Complete With the Correct Length of Square machine Bolt ..... Good Attention to Detail To Make proper fit & Sound, Just like the Original Mufflers.... These Are New, Cast Iron Castings Done Professionally In A Foundry, Then Bolted together with a Square Machine Bolt, Just As the Originals were.......

Here is A New Reproduction Muffler for A 1/2 Hp Maytag Upright Gas Engine, This is A Very Good Cast Iron Reproduction, Complete With the Correct Length of 3/4" Black Pipe..... Good Attention to Detail To Make proper fit & Sound, Just like the Original Mufflers.... These Are New, Cast Iron Castings Done Professionally In A Foundry, Then drilled & Threaded On A lathe, Riveted together with 3/16 Rivets Just As The originals were.......

This one has not been out for a while, so don't miss this chance to install this muffler on your Alamo and Alamo contract engine! This is a reproduction made of cast iron and hot riveted just as it would have been originally. Comes threaded with 1" NPT threads and is just over 4" in diameter.

Here is our copy of the BIG Monitor Baker muffler which fit the 6 and 7 hp engines. This muffler is cast iron and has "GF91" cast into the back and "GF92" cast into the front. It is fastened with period correct plain finish 1/2" square head hardware.