1 pulley for sale, brand-new and used.

This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.

This auction is for one new old stock Auto Grace 6 hp., single cylinder, water cooled, Lister type diesel engine and accessories. I imported theengine from India in 2001 and it has been in storage. The engine has been uncrated but never started since I've owned it new.

This is a real nice original cast iron pulley for a York hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It measures 12 inches in diameter with a 5 inch face.

This would be the perfect Christmas gift for the engine collector. Winter projects. I have 2 ROOT & VANDERVOORT hit miss gas engines that will only sell together.

Nice big pulley no cracks breaks or repairs that I can see

My photos are of the clutch disassembled & small pieces are all together on the counter top. The clutch is really simple with only eight parts.The pulley part #9  is on the chair. Then all the parts are assembled together.

Pulleys and Belting, by the staff of International Correspondence Schools, published by International Textbook Co., Scranton, PA, 1929, ICS # 2448, Edition 1. 5 1/2 x 8 1/2 softcover, 40 pages. Reprinted in 2011 by Nation Builder Books, Mebane, NC.

This listing is for a new Lister driving pulley 1.5" bore x 6.5" diameter, single belt. Commonly used as the alternator driving pulley on the crankshaft on Lister SL LD LR & SR engines, although many other applications would apply. If you are not sure whether this pulley is suitable for your engine please contact

This clutch pulley is made by Edgemont Machine Company, & is a bolt on style clutch pulley. The Pulley is 16 inches diameter. The bolt on plate is 12 & 3/8 diameter.

Here we have a large bolt-on pulley for the PTO side of a Briggs Model PB, it may be from an early model Bolens tractor. The entire pulley measures 6 1/8" diameter, with the flat belt part being 2 3/8" wide and the vee-belt groove is 1"wide to the outside. The center also is where you would use a starting crank on it.

Here we have the cast iron bolt-on pulley with the place to put the starting crank in the hub. The pulley measures 1 7/8" X 6 5/8" and has no breaks or repairs to it.

This pulley will fit 2 1/2 hp and up. It is 9 1/2" bolt centers. It is 8" diameter and in very good condition.

var itemNumber = window.ebayItemID ?

This is an extremely hard to find aftermarket flat belt pulley attachment for a Fordson tractor. It was made by the Plymouth Foundry in Plymouth, Wisconsin and is in great used condition with no cracks, breaks, or repairs of any kind. The pulley measures about 9 inches in diameter with a 6 1/2 inch face and turns as it should.

YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 1 1/2" FACE WERE BELT RUNS X 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.

YOU ARE LOOKING AT A NEW PAPER PULLEY THAT WILL START AT A VERY LOW PRICE.( THIS PULLEY IF YOU HAD ONE BUILT WOULD COST OVER $155.64 ) PULLEY WAS MADE BY paper pulleys inc. 5 1/2"OD X 7" FACE WERE BELT RUNS X 1 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY ?

YOU ARE LOOKING AT A NEW PAPER PULLEY PULLEY WAS MADE BY paper pulleys inc. 2"OD X 3" FACE WERE BELT RUNS X 3/4" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY QUESTIONS ARE NEED OTHER SIZE PULLEYS I HAVE MORE TO LIST,LET ME KNOW WHAT YOU NEED.THANKS FOR LOOKING.

This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.