Engine Clutch & Pulley Hit & Miss Engine Clutch Pulley.

US $1800

  • Annandale, New Jersey, United States
  • Jan 31st
My photos are of the clutch disassembled & small pieces are all together on the counter top. The clutch is really simple with only eight parts.The pulley part #9  is on the chair. Then all the parts are assembled together. No parts are missing & the item is 100 % complete. I have a complete parts list in a Nelson Bros, Engine book, for one of my engines.  To protect it from becoming stuck together in the future I've used never seize on the moving parts. It is in as found condition no paint no oil & minimum cleaning. It doesn't have manufacturers marking other than a number 3   0 on the clutch push hand wheel as seen in photo.   This engine clutch pulley is a shaft mounted style it has a diameter of 17 & 3/4 inches. The parts list addresses it as. 18 x 6  Part #. X26 The shaft hole size is for 1 & 1/2 inch. shaft. Beyond the shaft hole is an additional 1 inch of material if you want to bore out material to make a larger hole, for a bigger shaft.  The flat face of the pulley is 6 & 1/2 inches. If this was laying on a flat surface the height of this clutch would be between 12 & 1/2 to 13. inches high. It is very heavy, But could be shipped by UPS or Fastenal. It might be about 80 pounds. Buyer will pay shipping. May also be picked up at location in Annandale NJ 08801. It would be better to have a known shipping location to quote shipping cost. Perhaps figure $1.00 per pound shipping. It is being sold in used, as is condition without warranty. I have no idea of the true age of this clutch, It is sold as a no return item. Please feel free to ask questions.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes This clutch pulley is used, has been cleaned up to some degree but would need additional cleaning prior to putting in service.All moving parts are free & the clutch works as it was designed to. No defect are noted such as breaks, welds or structural repairs. Surface rust & minor pitting due to age and storage or use conditions.

Directions

Similar products from Engines

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies