1/4 inch ball bearings for sale, brand-new and used.

Untitled Document

Craftsman 15" -3 Speed Band Saw 1.5 HP 15"x15" Table 11 Amp 115V 1725RPM. In Excellent working and cosmetic condition as shown in pictures.Shipping will be FREE LOCAL PICK UP or $150 Domestic Continental Freight plus $40 Lift-gate fee in case it is needed. Specs and accessories: The 15", 3-speed vertical band saw for' cutting ferrousand non-ferrous metals, The band saw features a uni-tized frame of welded steel construction and

Two Matching Rotators. These are heavy duty. The bearings rotate smoothly.

Automatic Pivot Style Band Saw Model S-20A

[1] 6-inch spring dividers with adjusting screw Markings: None Condition: good as new; sharp points; no wear, rust or pitting [2] 6-inch steel ruler Markings: "No 600", '"THE L.S.S.CO." "ATHOL MASS. U.S.A." "Tempered No 4" Scales: 1/32 & 1/64 inch on marked side; 1/8 and 1/16 inch on other side; Condition: medium;

Lathe Work for Beginners: A practical Treatise on Lathe Work with complete instructions for properly using the various tools, including complete directions for wood and metal Turning, Screw Cutting, Measuring Tools, Wood Turning, Metal Spinning etc., and instructions for Building Home-made Lathes with their attachments, etc., by Raymond Francis Yates, originally published by the Norman W. Henley Publishing Co., New York, NY, 1922. Reprinted by Lindsay Publications, Bradley, IL, 2003.

These plans are to build a heavy duty sawmill. The saw is a fresh design based on a simple idea that the saw must be extremely strong, very accurate, easy to align and maintain, and cost efficient to build. It was built to cut Mesquite, a very hard wood, so it will make short order of any kind of wood you want to saw.

This is our 4x4 CNC plasma and mill with rapids over 500 ipm. The reason we can say plasma as well as mill, is that we use 25mm rail and carriage bearings, not skate or groove bearings, which are held in place with spring on the stepper. We’ve used 15mm wide rack and pinion out of harden steel, and while others may use plastic or narrow gear racks, that can’t hold the stress needed to do the milling, our unit uses 15mm rack with 20 tooth pinion, so it has plenty of speed for plasma.

New old stock HAYNES® alloy 25 (L605) (UNS R30605) Ni 10.0, Cr 20.0, Mn 1.5, C 0.33, Si 0.40, Fe 3.00, S 0.030, Co Bal., P 0.040, W 15.00 High Perfo

Here is a good Schmidt shaper molder blade set up.The colar measures 1 1/4 inches across the center,1 inch thick and 3 inches overall.The side with the bearings is 1 1/8 overall.The blades are 1 inch wide and 1/4 inch thick.(I have a few more this thickness if you are interested).The condition of the blad

Check out my

START TO FINISH PROJECTS WITH ROYAL KING'S CHOICE POWER CARVING KIT 2-22-TOOTH LANCELOT 2-14-TOOTH LANCELOT 1-18 TOOTH SQUIRE 1-HOLEY GALAHAD #47871FCB 3- IGRAINES FLAP DISC SANDERS 1-24 1-60-1-80 GRIT 1- UNIVERSAL NUT .5/8 CENTER HOLE DISC US GRINDERS POWER CARVING KITS ARE CHOICE SELECTIONS OF OUR MOST POPULAR ACCESSORIES. THESE COMPLETE [ SETS OFFER A DISCOUNT PRICE COMPARED TO INDIVIDUAL PURCHASES. SAVE $42.00

START TO FINISH PROJECTS WITH ROYAL KING'S CHOICE POWER CARVING KIT 2-22-TOOTH LANCELOT 2-14-TOOTH LANCELOT 1-18 TOOTH SQUIRE 1-HOLEY GALAHAD ROUND MEDIUM RED 3- INGRAIN FLAP DISC SANDERS 1-24 1-60-1-80 GRIT 1- UNIVERSAL NUT .5/8 CENTER HOLE DISC US GRINDERS POWER CARVING KITS ARE CHOICE SELECTIONS OF OUR MOST POPULAR ACCESSORIES. THESE COMPLETE SETS OFFER A DISCOUNT PRICE COMPARED TO INDIVIDUAL PURCHASES. SAVE $42.00

For sale is a running and well maintained Powermatic 221 20" Planer. It can surface boards up to 20 inches wide and 8 inches tall. Motor is a 3 phase 5 HP Baldor, and it runs strong.

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.

---------------------------------------------------------------- Coupling for 1/4" shaft Nema 23 motors ---------------------------------------------------------------- Heavy Duty Professional Precision Z Axis

---------------------------------------------------------------- Overstock Clearance....limited stock available Coupling for 1/4" shaft Nema 23 motors ------------------------------

---------------------------------------------------------------- Coupling for 1/4" shaft Nema 23 motors ---------------------------------------------------------------- Heavy Duty High Quality Precision Z Axis

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4995.00 This is a 24"x 49" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.

Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4595.00 This is a 24"x 24" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.