1/4 inch ball bearings for sale, brand-new and used.

2-1/32" hole ALL THE WAY THROUGH!!!!!! Brand new for SPRING 2013, this has been in the design phase for some time to make this truely different. Only available in 0-5 RPM, Perfect for TIG Special build 1 week delivery.

NEW CLASSIC TL525 TABLETOP PRODUCTION MACHINE TownLabs 4-Axes Ball Screw Tabletop CNC Milling Machine with NEMA34 steppers Model TL525-4-ER16-AC2 with ER16 spindle and internally pre-loaded ball screws.

For sale by owner. Used for only a few hours. Like new!

This is our 4x4 CNC plasma and mill with rapids over 500 ipm. The reason we can say plasma as well as mill, is that we use 25mm rail and carriage bearings, not skate or groove bearings, which are held in place with spring on the stepper. We’ve used 15mm wide rack and pinion out of harden steel, and while others may use plastic or narrow gear racks, that can’t hold the stress needed to do the milling, our unit uses 15mm rack with 20 tooth pinion, so it has plenty of speed for plasma.

For sale is a running and well maintained Powermatic 221 20" Planer. It can surface boards up to 20 inches wide and 8 inches tall. Motor is a 3 phase 5 HP Baldor, and it runs strong.

Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.

INCLUDES ABOUT $150 of various grit brand new sandpaper rolls by Jet Used this machine a few times for some small projects and need the space back. It is in excellent like new condition and comes with DRO. I have a forklift.

Ebay Brand New JET 708411 JOVS-10 1HP 115V Floor Standing Oscillating Spindle Sander

Jet 22-44 Pro Drum Sander 3HP, 1Ph, DRO, Tables and Casters (Stock 649600)

ACCURA 02020 20 INCH 3 HP 220 VOLT BAND SAW This MONSTER saw features heavy gauge high rigidity welded.. steel cabinets. Cast iron blade wheels are fully balanced with rubber tires and travel on quality sealed bearings.

ACCURA 01124 24 INCH STRAIGHT KNIFE SAWMILL/LUMBERYARD PLANER 5 HP SINGLE PHASE This PLANER the "Big Daddy" of our planer line! It features a heavy cast iron frame, cast iron tables that raise and lower on heavy duty jack screws, and a Reeves drive type 1 HP variable feed speed system that allows feed rates from 19-39 FPM. Segmented feed rolls allow for feeding of slightly different thicknesses of stock.

THIS RP4 SHAKER TABLE WAS PURCHASED ROUGHLY 1 YEAR AGO AND IS IN GREAT WORKING ORDER. IT WAS SETUP IN THE GARAGE SO THERE IS NO WARPAGE ON THE TABLE AS THIS WOULD BE A CONCERN IF SETUP AND LEFT OUTSIDE. THIS INCLUDES THE STAND.

var itemNumber = window.ebayItemID ?