10 rod for sale, brand-new and used.

ROTOCON LAB FRAME, Model NAZ33, 3 Ft Wide by 3 Ft High and approximately 18 Inches Deep. This model exhibits the "No Base Support Rod" design. Made of 1/2 inch round 6061-T6 solid Aluminum rods connected and anchored by our tough Rotocon Zinc-alloy Assembly Clamps using nickel-plated steel nuts and screws.

Forney 30690 E7018 AC Welding Rod, 5/32-Inch, 10-Pound Line Weight: 10-Pound | Size: 5/32-Inch The Forney 30690 7018 AC Mild Steel Low Hydrogen Welding Rod produces quality results on lower amperage welders. Suitable for all positions on hard enable steels without pre-heating. Good for cold rolled steels that do not react well with conventional rod.

Up for Sale is this New Old Stock STANLEY 15-410 Carbide Grit Rod Saw. Please check the pictures and ask your questions before bidding. INTERNATIONAL SHIPPING BY EBAY’S GLOBAL SHIPPING PROGRAM ONLY Please check my other eBay items, you never know what I might be selling Payment is by PayPal onl

Line Weight: 10-Pound | Size: 5/32-Inch The Forney 30690 7018 AC Mild Steel Low Hydrogen Welding Rod produces quality results on lower amperage welders. Suitable for all positions on hard enable steels without pre-heating. Good for cold rolled steels that do not react well with conventional rod.

Forney 30510 E6013 Welding Rod, 5/32-Inch, 10-Pound

Forney 42330 Copper Coated Brazing Rod, 1/16-Inch-by-36-Inch, 5-Pounds

Newborn 101 1/10GL Superior E-Z Thrust Smooth Rod Caulking Gun

Dripless C150 Consumer Grade Smooth Round Rod Caulking Gun, 10 oz Cartridge Capacity, 5:1 Thrust Ratio

Nylon 6/6 Round Rod, Opaque Off-White, Standard Tolerance, FDA compliant, 3/8" Diameter, 24" Length

You are buying 5 rods (approximately 1.4+ ounces, oz) of EutecRod 1601 Low Temperature Silver Brazing Soldering/Welding Rod. Each rod is 18" long and 1/16" in diameter. Yellow tipped.

You are buying 1 pound (lb) of EutecRod 1601 Low Temperature Silver Brazing Soldering/Welding Rod. Each rod is 18" long and 1/16" in diameter. Yellow tipped.

ER308/308L Stainless Steel TIG Welding Rod measuring 5/32" X 36" is used for MIG, TIG, plasma-arc welding and submerged-arc welding. It has low carbon content, good resistance to intercrystalline corrosion and good resistance to general corrosion. TIG rod is appropriate for joining stainless steels of the 18Cr/8Ni/ELC and 18Cr/8Ni/Nb types for service temperatures up to 350 deg C and is approved by TUV for use at cryogenic temperatures down to 4 deg K.

ER309/309L Stainless Steel TIG Welding Rod measuring 1/8" X 36" Dia is ideal for joining stainless Cr-Ni steels of 309 type, Cr-steels and dissimilar steels. It is also used for MIG/MAG-, TIG-, plasma-arc and submerged-arc welding. It is normally used for joints between non-alloyed or low alloyed steels and stainless steels where resistance to corrosion is of secondary importance.