1070 steel for sale, brand-new and used.

Please wait a few seconds while auction is loading !!!

RANDELL 2010F SINGLE DOOR FREEZER THIS IS A USED, CLEANED AND TESTED, WORKING PERFECT, RANDELL ONE DOOR FREEZER. THIS UNIT IS ON CASTERS, HAS 3 SHELVES AND WAS TESTED OVER 24 HOURS WITH A HOLDING TEMP OF -2.6 DEGREES. THE FREEZER WAS REMOVED FROM A WHOLE FOODS MARKET AND WAS WELL MAINTAINED.

New Stainless Steel Work Prep Table Reference when calling us: 1070 1. Overall Size ( LxDxH) : 72"x24"x34" 2. NSF 3.

This auction is for ONE cylinder. It will be local pick up only. I will allow a shipping company to come to my property for pickup.

SCM SI400 Nova Slider SLIDING CARRIAGE: MAXIMUM CUT QUALITY GUARANTEED OVER TIME. The carriage will never require adjustment due to its structure with arch-ground steel slideways (Scm exclusive and patented solution) so it can carry loads four times higher than others.

JET - ARBOGA 20" Variable Speed Geared Head Drill Press 3/4 HP / 115 VAC 8 Speeds Range

THE 'V-NOTCH" OF THIS STURDY BLOCK WEDGES ON THE STRAND FOR NEW BUILD CONSTRUCTION OR TWO .750" CABLES FIT BETWEEN THE FRAME AND THE RETAINING PIN FOR OVERLASH JOBS. THE STEEL GATE RETAINS THE CABLE BEING PULLED OUT. THE RUBBER ROLLER OF THE M-1070-1 SUPPORTS A CABLE UP TO 1 1/2.

Lang GPO-2 Door Double Stack Stone Deck Pizza Ovens The Lang Air Door Pizza Oven is designed to operate with the door OPEN. A minimal movement of air, flowing across the door opening from bottom to top, keeps the heat inside the oven and out of the kitchen. A cooler kitchen means more comfortable working conditions & less strain on ventilation or air conditioning systems.

UP FOR SALE BLOWER , HERE ARE THE SPECS : Type Assembled, Double Inlet Forward Curve, Direct Drive, With Motor Speed 3 Wheel Dia. (In.) 13 Wheel Width (In.) 9-1/2 CFM Range 2701 to 1384 @ 1.20-In SP to 1.80-In SP Max. Inlet Temp.

Nevada Weighing LW Measurements LCT 110 Portable Large Counting Scale Precision Balance - 110 lbs x 0.005 lbs - Rechargeable! With 2 Year Warranty!

Hedland H601A-010 Flowmeter, Aluminum, For Use With Oil and Petroleum Fluids, 1 - 10 gpm Flow Range, 1/2" NPT Female

INETIG S2 COPPER FREE ER70S-2 1/16 x 36-Inch on 10-Pound Tube Tig Rod for Welding Carbon Manganese Steels

Sloan EFX-800.102.1040 BASYS Sensor Faucet, Wall Mount, Bowed, 1.5 GPM Aerator, Hard Wired, Below Deck Mixing Valve, 6 VDC Box Mount Adapter

Airtherm Wall Mount Type Cabinet Heater, Model W-1070-04Consisting of:· 16 gauge steel front panel with baked powder coat finish.· · 29,800 BTUH @ 180 degree water temperature and 2.98 GPM· 430 CFM high Speed, 345 CFM low speed· 115 volt PSC motor with unit mounted speed switch.· Fan cycles off of room temperature setting (unit mounted)· Standard washable aluminum filter.· Limited access fa