11/16 bolt for sale, brand-new and used.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Bernard Dalsin Manufacturing (BDM) Stainles Steel Bolt On Chimney Caps BDM, the same company behind the stainless steel CHIM-A-LATOR ® damper system also manufactures matching stainless steel bolt on chimney caps. This cap is proudly manufactured in the USA, and comes with a lifetime warranty. Install is simple...just climb the ladder with a screw

Replacement Survey Tripod Threaded Bolt and Swing Arm NAME BRAND TRIPODS ONLY - We do not know if this will fit in a Chinese knock-off Don't use a bolt from the hardware store, they can be over-tightened or be threaded in too far causing damage to your costly instrument. Fits CST Berger, Bosch and David White tripods, if your unit resembles the ones seen in the boxes with a small hole than they will fit, smooth bore shaft is 3/4 of an inch in length. Threaded b

Great Neck 40 Piece 1/4-Inch and 3/8-Inch Drive Socket Set 40-piece socket set; metric and English sizes 3/8-inch reversible ratchet and accessories Triple chrome plated to resist rust Includes 1/4-inch and 3/8-inch drive sockets, molded plastic case 9.8 by 1.8 by 5-inches; 2.2 pounds; lifetime warranty No matter what your skill level might be

Description: DBI-SALA manufactures the industry's widest range of anchorage connectors, combining ease of use, light weight and high strength. The concrete D-ring anchor offers a compact, reliable connection point for your fall protection system.

Genuine U.S. Military Issue Surplus Raytheon Company - Tee Head Stainless Steel Bolt - P/N: 4023519-0001 (NOS) (NOS) = New Old Stock  P/N: 4023519-0001 NSN: 5306-00-846-1088  Characteristics Thread Class: 2A Thread Direction: Right-hand Thread Length:   0.750 inches minimum and 0.780 inches maximum Fastener Length: 1.471 inches minimum and 1.501 inches maximum Head Style:     Tee no.