12v Linear Actuator, Warner, D12-10a5-12cm3

US $195.00

  • Topeka, Kansas, United States
  • Feb 20th
This article details the 12V linear actuator from Warner, specifically the D12-10A5-12CM3 model. This item is designed to operate using 12V DC power and has a stroke length of 12 inches. The pin mounting holes are 1/2" in size on both the motor and rod ends, and the length between these mountings when retracted is 21 inches. This model also comes equipped with a clutch. All Warner linear actuators were designed to run using 12V DC nominal power and were fused at 20 - 30 amps. Each actuator weighs between 11 - 15lbs. For specific questions, please contact the seller. Thank you. During testing, the clutch slipped at 1600 lbs, tested at mid-stroke @ 13.5 volts, 65 degrees F. These actuators were previously used and tested before being listed here, and there are no warranties or returns. While some may or may not have a clutch configuration in the retraction configuration, it is important to research the specifications of the model number to ensure it is applicable.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Warner Electric
Country/Region of Manufacture United States
Model D12-10A5-12CM3

Directions

Similar products from Linear Actuators & Bracket Stroke

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies