14 tooth gear for sale, brand-new and used.

I describe this lot "Manufacturer Refurbished" due to different depth of sharpening on some cutters. Items are new & never been used, this is just unsignificant imperfection of USSR factory sharpening.Despite this, material quality was very high those days, at least better than chinese HSS nowdays.According to my experience these cutters' form relieved to allow resharpening many times.Feel the difference (1st photo: my cutters; 2d - used cutter resharpened many times): &

Description: Gear Tooth Cutters: Brand B&S Pressure Angle ( ) WE BELIEVE THE PRESSURE PITCH IS 14 1/2 DEGREES, HOWEVER IT IS NOT MARKED Diametral Pitch 32 Cutter Number 7 Arbor Hole Diameter (Inch) 7/8 " Material High Speed Steel item #287-- IF PURCHASING MORE THAN 1 GEAR PLEASE WAIT FOR REVISED COMBINED I

Description: Gear Tooth Cutters: Brand B&S Pressure Angle ( ) WE BELIEVE THE PRESSURE PITCH IS 14 1/2 DEGREES, HOWEVER IT IS NOT MARKED Diametral Pitch 24 Cutter Number 5 Arbor Hole Diameter (Inch) 7/8 " Material High Speed Steel item #122-- IF PURCHASING MORE THAN 1 GEAR PLEASE WAIT FOR REVISED COMBINED I

Description: Gear Tooth Cutters: Brand B&S Pressure Angle ( ) WE BELIEVE THE PRESSURE PITCH IS 14 1/2 DEGREES, HOWEVER IT IS NOT MARKED Diametral Pitch 40 Cutter Number 3 Arbor Hole Diameter (Inch) 7/8 " Material High Speed Steel item #237-- IF PURCHASING MORE THAN 1 GEAR PLEASE WAIT FOR REVISED COMBINED I

About us Shipping

Description: Gear Tooth Cutters: GEAR CUTTER 24 P 18T 7/8 " BORE MADE IN U.S.A. #516 Brand B&S Pressure Angle ( ) WE BELIEVE THE PRESSURE PITCH IS 14 1/2 DEGREES, HOWEVER IT IS NOT MARKED Diametral Pitch 24 Cutter Number Arbor Hole Diameter (Inch) 7/8 " Material High Speed Steel

Description: Gear Tooth Cutters: BEVEL Brand B&S Pressure Angle ( ) WE BELIEVE THE PRESSURE PITCH IS 14 1/2 DEGREES, HOWEVER IT IS NOT MARKED Diametral Pitch 32 Cutter Number Arbor Hole Diameter (Inch) 1/2 " Material High Speed Steel item #426- IF PURCHASING MORE THAN 1 GEAR PLEASE WAIT FOR

I describe this lot "Manufacturer Refurbished" due to different depth of sharpening on some cutters. Items are new & never been used, this is just unsignificant imperfection of USSR factory sharpening.Despite this, material quality was very high those days, at least better than chinese HSS nowdays.According to my experience these cutters' form relieved to allow resharpening many times.Feel the difference (1st photo: my cutters; 2d - used cutter resharpened many times): &

<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk1" target="_blank"&a

<img src="http://ti2.auctiva.com/web/aswCredit.gif" border="0"><br><a href="http://www.auctiva.com/?how=scLnk1" target="_blank">&a

. Murphy MTH6 Tachometer/Hourmeter NEW, Old Inventory .  This is for a Murphy MTH6 digital tach / hourmeter with overspeed shutdown or alarm switch. This comes to you new, with a 14 day guarantee.

GEAR TOOTH CUTTER DP8 PA141/2 DEG. NO 7 FOR 14-16T HSS CHINA

Welcome to my site! Up for sale is an Original 24 Tooth Change Gear for a 6" Sears Roebuck Model #101.07301 Metal Lathe There is some information on the internet about this specific lathe model. I found the following information at the internet site: lathes.co.uk/atlas6inch/ "Styled to closely resemble its larger brother, the "10-inch", the Atlas 'Model 618' 6" x 18" (3.5" centre height) backgeared and screwcutting lathe was in production from 1936 until 1974 and then, in

For your bidding pleasure is a lot of 14 milling cutters including slitting cutters, and some straight tooth side & face milling cutters. As far as I can tell these are all HSS, and I believe that they are USA made. The mounting hole is 1" for all of the cutters with the exception of the largest cutter which is 2 1/8".