14 vdc for sale, brand-new and used.

Motenergy ME0909 PMDC Motor, 12-48V, 4 hp cont, 12.8 hp pk The Motenergy ME0909 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 30 seconds. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 30 seconds).

Omron: E6B-CWZ6C-8 Rotary Incremental Encoder . 5 - 24 VDC. 125 P/R Res.

The item available here is a new Warner Electric holding brake. It comes with the original box that is dirty from being on a shelf, but the brake itself was protected. It has not been tested and comes with a 14 day return policy from the date the item was shipped, EXCEPT INTERNATIONAL SHIPPING.

Wavetek 34280 Programmable Attenuator 5P11SS12 A Wavetek Programmable

Payment Policy Brand New Sony CyberShot 8 MP Di

SPECIFICATIONS: Attenuation/Programmable:.........0-70dB in 10dB steps Frequency:.....................................DC - 18 GHz Supply Voltage:.............................24 - 30 VDC Termination:...................................SMA (F)

Unit tested and full operation verified Please note Option 011 is +5 VDC operation Specifications: (+5 VDC) Frequency range: dc to 18 GHz Attenuation range: 0 to 70 dB, 10 dB steps Insertion loss at 0 dB: 0.4 dB + 0.07 dB/GHz Maximum SWR: 1.35 to 8 GHz, 1.5 to 12.4 GHz, 1.7 to 18 GHz Repeatability life: 0.03 dB maximum, 5 million cycles per section Maximum RF input power: 1 W (average), 100 W (peak) Connector type: SMA female

Multi-format, multi-standard SD/HD-SDI waveform, picture monitor, gamut, audio, vectorscope, and data error logging all in one unit! Power supply, AC cable, user manual, & two 75ohm BNC terminators included. Latest firmware has been installed (V3.2.6).

UP FOR SALE: ONE (1) BRAND NEW, NEVER USED Druck UPS III Loop Calibrator. THE SHIPPING BOX HAS BEEN OPENED TO TAKE A COUPLE OF PICTURES. SPECIFICATIONS: Measure or Source 0 to 24 mA Accuracy 0.01% of reading Dual mA and % readout, linear or flow Step, Span Check, Valve Check, Ramp 6 VDC measurement and continuity HART

Altek 134-2 PocketCal mA Calibrator New - Factory Warranty Basic Milliamp Functions Source 0.00 to 24.00 mA or -25.0 to 125.0%, read mA or percent to 24.00 mA, simulate 2-wire transmitters, power and measure 2-wire transmitters. Basic Accuracy A±( 0.08% of 24 mA Span + 1 LSD

The item is the Calibratory D-105 DC DC Voltage Reference Standard. It accepts 12VDC-35VDC INPUT. The OUTPUT is 10.000000 VDC ±

used CAPACITOR RIFA SWISS 2200 pF 63 VDC WORKING FINE Sold as is. Thanks. TERMS OF USE