We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! GF Condition: GREAT!
We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! GF Condition: GREAT!
Up for auction is an Erickson collet complete set. Condition is new with not rust on any of the collets and mandrels. Great for miniature work holding or Jewel work.
Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength Description – This angle is a higher strength / anodized version of our popular 3/4in aluminum angle. Almost everything about it is better. It is substantially higher strength, higher corrosion resistance, and lighter weight.
Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
Aluminum Angle 2” x 2” x 48 in, 1/16 in thick, 2 x 2 in, NEW!, Angles Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick. They measure 2 x 2 x 48 inch.
Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in Description – This is a special type of angle that was developed out of my solar panel business for the building of solar panels and eventually I realized other people had lots of other uses for them. How it works is that there are two 3/4 in channels riveted together. You can use the channel as is or, because it has layers, you can cut through one or both layers to create tabs that c
THE TOOL FOR EXTRACTING OR REMOVING HYDRAULIC ROD SEAL SEALS, O-RINGS, OR SHIMS, ETC. YOU GET WHAT YOU SEE IN THE PICTURE. THIS TOOL WILL SAVE YOU TIME AND MONEY PULLING HYDRAULIC SEALS, O-RINGS, SHIMS OR VALVE OR PUMP PACKING!
This auction is for (1 of two available) 2001 Kewanee Dual Fuel (Natural Gas or Diesel) 800 HP boilers with a burner that has a 10:1 Turn down ratio on the burner so it will run great in the range of 80 to 800 HP. In addition this system is NOX compliant and has guaranteed performance of NOX30 or better in its current installation it has been running NOX 17. These boilers are in VERY nice condition.
We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! NL Condition: Excellent Specifications: Outside Diameter: 4" Inside Diameter: 3" Stock Length: 32" Stock Thickness: 1/2" Weight: 17 lbs Comes as shown in pictures.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.