1750 10 for sale, brand-new and used.

9" Wide Timesaver Wet-Type Pass Thru Belt Sander/Grinder Model #: 960-1MW S/N: 25103S 9" Wide x 60" Long Belt. Includes 4x boxes of 80 Grit 3M Model #577F Cubicut/Polycut resin bond cloth belts Sanding Belt Drive Motor: 10 Hp, 220/440 Volt, 3 ph, 28/14 Amps, 60 Hz. Conveyor Belt Drive Motor: 1/2 Hp DC, 180 Volt, 2.5 Amps, Continuous Duty, 18.0 In/lb of Torque, 1750 RPM Coolant Sump Pump Motor: 1 Hp (.75 KW), 208-220/440 Volt, 3 ph, 3.2/1.6 Amps, 60 Hz.

NO RESERVE!!!!! EXCELLANT!! GUARANTEED!!

ITEM: VERY NICE HALDE RG 400 HOBART FP 400 FOOD PROCESSOR WITH MANY ACCESSORIES INFORMATION: VERY NICE HALDE RG 400 HOBART FP 400 FOOD PROCESSOR WITH MANY ACCESSORIES This food processor had a single owner - the school system. They hardly used this machine and as a result sold it. You will be the second owner as after acquiring this machine it was thoroughly cleaned professionally and fully tested.

36" x 44" Long SS Sorting Conveyor with Diverting Conveyor & SS Lift Table Top Conveyor is sorting conveyor which separates product into 2 lanes, The lower conveyor is a diverting product tray conveyor which separates product trays into 2 lanes. Both units are mounted to a Heavy Duty SS Lift table for elevation changes for stacking or product changes. All 3 units operate together and are controlled through an Allen Bradley PLC Micrologix 1200 and an Allen Bradley 300 Micro Panel View.

Nice vintage working electric motor up for bid. Sold as is and weighs nearly 25 pounds. Stands nearly 7 inches tall, 10 Inches long and 6.5 wide.

These is an unused Nook ActionJac Upright Worm Gear Ball Screw Jack, 5 ton lifting capacity, Model 5-BSJ-U with a 24:1 gear ratio. The jack includes a very heavy duty mounting plate of 3/4" steel that measures 10" x 10" x 12.5". The plate on the bottom of the screw jack is 1/2" thick and 4.5" diameter.

Rebuilt 150hp DC Motor We are a large motor repair in the St. Louis this one went through shop Motor will require a new blower which we could supply at additional cost if needed any questions please call me at 1-800-530-5810 ext.216 Mark CAT.NO. D50150URE-BV SPEC NO.

Roundup Vertical Bun Toaster Conveyor VCT-10

Please Call Us At 877-283-7614 Or Email Us For Lead Time Please note: If paying via credit card or PayPal, there will be a 3% handling fee added to your order

Please Call Us At 877-283-7614 Or Email Us For Lead Time Please note: If paying via credit card or PayPal, there will be a 3%

Please note: If paying via credit card or PayPal, there will be a 3% handling fee added to your order Please Call Us At 877-283-7614 Or Email Us For Lead Time

Please note: If paying via credit card or PayPal, there will be a 3% handling fee added to your order Please Call Us At 877-283-7614 Or Email Us For Lead Time

Please note: If paying via credit card or PayPal, there will be a 3% handling fee added to your order Please Call Us At 877-283-7614 Or Email Us For Lead Time

Please note: If paying via credit card or PayPal, there will be a 3% handling fee added to your order Please Call Us At 877-283-7614 Or Email Us For Lead Time

Please note: If paying via credit card or PayPal, there will be a 3% handling fee added to your order Please Call Us At 877-283-7614 Or Email Us For Lead Time

Please note: If paying via credit card or PayPal, there will be a 3% handling fee added to your order Please Call Us At 877-283-7614 Or Email Us For Lead Time

Tri-Rotor Pump/Motor Combination on Steel Base Mount INTRINSICALLY SAFE INSTALLATION CAPABLE FOR PUMPING VISCOUS FLUIDS - PREVIOUSLY USED TO TRANSFER CORN SYRUP IN SHERWOOD BRANDS CANDY MFG FACILITY Model #: 100CX S/N: 2318C Group: S. REL - FDA PACKAGE Shaft Type/Rotation: M / CW SAN PREP / HD SRPG Dorris Speed Reducer Gearbox Model #: 1809 S/N: B-184070 Ratio: 9.3 to 1 Max. Hp: 10.0 Max.

Design and built to Mil-P-18547 and Amendment #1, Class O-1, Type II Shock Tested to Mil-S-901B

35.5" x 20" TANNEWITZ VERTICAL BAND SAW #27802 Serial No 14800RE, Model G-1E, TO VIEW VIDEO: https://youtu.be/CCGghBljA5Y EQUIPPED WITH: Gear Adjusted Ground Guide Post Worm & Gear Tilting Table Automatic Hydraulic Brake Foot Pedal Control CATALOGUE SPECIFICATIONS: Work Capacity, Nominal.................. 35.5" x 20" Throat Depth, Rated..................... 35.5" Auxilliary Table Dimensions, W x L......