The new Cobra 5 Power Brush system from Air-Care is an advanced version of the workhorse that has been aggressively cleaning air ducts for 4 decades. Continuously Variable Speed Control 35 Ft Long Cable/Brush Forward/Reverse Wired Remote The Cobra 5 has a wired, handheld remote. It has Forward, Stop, and Reverse functions at the operators finger tips.
FEATURES: The preferred pump frame in the cleaning industry Forged brass manifold with an exdlusive lifetime warranty Large capacity, die cast, anodized aluminum oil bath crankcase Over sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricating packings Unitized stainless steel inlet and discharge valves Available in left handed "L" version SPECIFICATIONS
Hot water boiler, heater, 210,000 BTU, Oil fired, Marine, Way Wolff, Ray Burner This is an unused hot water boiler made by Way Wolff, model 3434-10E. Boiler is a cylinderical design with the burner located on the top of the unit and the rectangular exhaust port on the side. These types of boilers are commonly used in marine applications but there would be no reason it could not be used in another application that requires similar specifications.
has a 15 gallon tank max psi is 3800 has a general electric 3 HP induction motor PH 3 volts 208-220/240 cycles 50: rpm 1455 amp 10.8/5.4 deg c rise 50 service factor 1 cycles 60: rpm 1750 amp 9/4.5 deg c rise 40 service factor 1.15
Here’s a Parker Vickers, 3 Circuit, 5 HP, 7 GPM, 30 gal Hydraulic Power Unit / Pump / Solenoid Valve, 2000+ p.s.i. Peabody Galion Compactor surplus unit; 3 separate forward / reverse control circuits! Recently removed from service - tested & guaranteed (see pics.) - Well equipped unit...
48” x 10’ Long Stainless Food Grade Incline Conveyor with SS Belt Mfg by CHS 48" SS Food Grade Belting - Heavy Duty Incline Conveyor 8" SS sides above belt 57" Infeed Elevation 62" Discharge Elevation SS frame construction SS Drip pan SS Top cover for over conveyor belt - removable 1 hp / 1750 rpm drive with gearbox reduction Electrical 230/460 Volt / 60 Hz / 3 Phase Just Removed from production EXCELLENT Condition !!
36" Wide x 7' Long SS Incline Conveyor White Food Grade Plastic Belt, Conveying SS Wash Down Motor SS legs included - Removed for shipping purposes 36” wide White Food Grade Plastic Belting 40" infeed elevation 48” discharge elevation SS Wash Down Motor 2 HP / 1750 rpm Electrical 208/230/460 volt / 60 hz / 3 phaseRemoved from a Major Food Plant Excellent Condition !!
Accumulation Table, SS Conveyor, 40” x 106" Long, Sorting Packing Conveyorwith Speed controller Can also be used as a feed or pack table 40" wide x 106" long + 24" additional infeed lane (3) 12" wide belt (1) 3.25" wide belt SS Construction Rexnord Plastic belt Side rails - adjustable Adjustable leg levelers SS legs Casters for easy mobility 36” Elevation 1/2 HP / 1750 rpm drive Dart speed controller Electrical 115 Volt / 60 Hz / 1 Phase
Hytrol 24” x 25’ Long Powered Incline Case Conveyor Serial #488667 24” wide grip-rite black belt 28” wide frame 20’ Incline Length with 5' Long Infeed Conveyor 40" Infeed elevation (adjustable legs) 110" Discharge elevation (adjustable legs) 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Just removed from productionExcellent Condition !!
12” W x 16’ Long SS Incline Conveyor with White Food Grade Belting SS FrameSS Legs - Discharge legs removed for shipping purposes, but included 12" White Rubber Food Grade Belt 30" infeed elevation 52" discharge elevation - can be modified 2 Hp / 1750 RPM Baldor driveElectrical 208/230/460 Volt / 60 Hz / 3 Phase Removed from a Major Food PlantExcellent Condition !!
42” W x 10' Long SS Conveyor with SS Wire Mesh Food Grade Belt SS Frame construction SS Legs with level adjusters 42" SS Wire Belt 10' Overall length 40" elevation – adjustableSS Drip Pan with drain1 Hp / 1750 rpm drive (Center drive) Electrical 208/230/460 Volt / 60 Hz / 3 PhaseJust Removed from a Major Food PlantVery Good Condition !!
20" x 21' Long Incline Case / Box Conveyor Just removed from production 18” wide grip-rite black belt 20” wide frame 21’ Overall length with nose over area 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Last suspended from celing Excellent Condition !!
NEVER USED 16" Powered Case Metering Conveyor, Mfg by Integrated Mfg by Integrated Conveyor Systems Serial #1011861 16" Powered Case Conveyor (2) 48" Metering Belts - 16" BF - 12" Belt 1 Hp / 1750 rpm Tigear Drive 25:1 Gearbox reduction 110" Overall Length Electrical 208/230/460 Volt / 60 Hz / 3 phase NEVER USED / LIKE NEW CONDITION !!
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.