1750/5 for sale, brand-new and used.

has a 15 gallon tank max psi is 3800 has a general electric 3 HP induction motor PH 3 volts 208-220/240 cycles 50: rpm 1455 amp 10.8/5.4 deg c rise 50 service factor 1 cycles 60: rpm 1750 amp 9/4.5 deg c rise 40 service factor 1.15

You are bidding on ( 1 ) new Parker TC00653F720AAAA, LSHT Tow & Recovery Hydraulic Motor P/N TC00653F720AAAA Series - TC Displacement - 4.0 cu in Mounting - SAE "A", 2 bolt Shaft - 1" Keyed Rotation - Standard Ports - 3/4"-16 SAE O-Ring Max Speed 517 rpm (cont) Max Flow 9 gpm (cont) / 9 gpm (interm) Max Torque 582 lb-in (cont) / 810 lb-in (interm) Max Differential Pressure 1250 psi (cont) / 1750 psi (interm) Max Supply Pressure 1950 psi Mas HP 6.5 Made in USA FREE SHIPPING in the USA only.

We do honor our 14 day return policy, if you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES, IS WHAT WE SEND TO YOU!!!!

Here’s a Parker Vickers, 3 Circuit, 5 HP, 7 GPM, 30 gal Hydraulic Power Unit / Pump / Solenoid Valve, 2000+ p.s.i. Peabody Galion Compactor surplus unit; 3 separate forward / reverse control circuits! Recently removed from service - tested & guaranteed (see pics.) - Well equipped unit...

Payment Policy Brand New Sony CyberShot 8 MP Di

Consolidated SS Cap Elevator with SS Hopper, 12" Cleated Incline Conveyor Model FEH-15 Serial #729392 Incline conveyor is 12’ Long SS construction MS legs 12” wide cleated belt – some cleats are broken SS Hopper – 40” x 46” x 28” Deep with SS Top SS discharge chute 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottle caps Belt is showing signs of wear Last used in a water bottling plant Good Condition !! For More Information, EMAIL

Empty Bottle / Cap Elevator Feeder with SS Hopper, 12" Incline Conveyor Previous client never installed belting on conveyor NO BELT on Conveyor - 12” wide incline conveyor SS Hopper – 58” x 58” wide x 66" Deep 110" discharge height SS discharge chute Fork pockets mounted on base 0.5 hp / 1750 rpm SEW Motor Unit was purchased for feeding empty plastic bottles NO Belt on Conveyor Excellent Condition !! For More Information, EMAIL

Palace Cap Bottle Elevator Feeder with SS Hopper, 8" Cleated Incline Conveyor SS contact parts 8” wide cleated incline belt SS Hopper – 32” x 30” wide x 32" Deep Hinged access top on hopper 78" discharge height SS discharge chute Adjustable leg levelers 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottles Last used in a small food plant Excellent Condition !! For More Information, EMAIL tesa

24” Wide x 6’ Long SS Food Grade Sorting Stacking Conveyor Mfg by APS Conveyor Sorting and Stacking Conveyor with Multiple belts Food grade beltLower Sorting station : - Outer belt #1 - 9” wide, cleated - Outer belt #2 - 9” wide, cleated - Center belt – 6.5” wide, cleated belt, driven from downstream conveyor, belt not included - 34" elevation Upper Stacking Area : - (2) 8" Cleated belts - 36” infeed elevation SS Construction SS Adjustable guide rails SS Legs - adjustable floor lev

Sani-Tech 2 tank CIP System Skid Mounted on SS frame 80 Gallon SS CIP Tank, 24” diameter x 42” side wall, cone bottom 200 Gallon SS Rinse Tank, 36” diameter x 48” sidewall 5 Hp SS Centrifugal Pump, 1750 rpm, 2” inlet x 1.5” outlet SS leg levelers AB VFAC speed controller Allen Bradley PLC, SLC 5 Series Vacon VFAC speed controller Anderson DA2 Temperature controller Honeywell ‘Trueline’ Recorder Pneumatic valves with SS interconnecting SS piping SS Control Panel Electrical 230/460

22" x 8' Long Case Separation Conveyor, Metering Conveyor (2) 18" wide x 48" Long belts22" BF (between frames) Length - 8' No legs - unit wa used prior to feeding a Palletizer 1.5 Hp drive / 1750 rpm with gear box Electrical 208/230/460 Volt / 60 Hz / 3 Phase

2009 Hoppmann EP08 SS Cap Feeder with Speed Controller Model #EP08/08 Serial #003046 2009 Year of Mfg. Last running ROPP aluminum caps SS Construction 8” cleated belt, 2" cleats on 6" centers SS Hopper - 38" x 40" x 20" Deep Pivoting elevation 96" discharge elevation (adjustable) Low cap sensor Hinged access top on hopper SS