1750/5 for sale, brand-new and used.

Equipment Express Waterfall Cap Sorter/Feeder Unit feeds and sorts caps for capping machinesLast running 24 mm plastic screw caps for energy shotsCapable up to 53 mm caps7.5” cleated beltMinarik speed controller Air assist featureCap Hopper - 24” x 24” x 20” Deep Adjustable discharge cap chuteCasters for mobilityAdjustable leg levelers0

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Vickers Integrated Motor Pump Model No. MP22-B1-L-P74CM-A-F1-20-S11 Assy. No.

Bell & Gossett Series 60 three-piece cast iron body booster pump for hydronic heating and cooling in commercial applications. 1/2 HP, 1750 RPM, 208-230/460v three phase motor. Includes pair of 1-1/2" flanges mounting hardware and factory lubricant.

Progressing cavity pump McKenna engineering 

JABSCO - "STURDI PUPPY" 1/6HP 115V 1725RPM --Used The "Sturdy Puppy" Motor-Pump units have the flexible impeller feature which provides self-priming and the smooth, gently handling of liquids so important for pumping foamy liquids, gels and suspended solids. With an all BRONZE body, stainless steel shaft and choice of impeller materials; these little little motor-pump units can be used in many applications including carboy and drum transfer. The general design of the pump body is bronze.

WESINGHOUSE 05-15H4 TBEP3SKB MOTOR 15 HP 1755 RPM 254T FRAME 230/460 VOLTS 3PH 39/19.5 AMPS

NEW OTHER BRONZE ITT- BELL & GOSSETT ALTERNATING CURRENT MOTOR. PN: M80050 A00 HP 1/6 RPM: 1750 PHASE: 3 HZ: 60 VOLTS: 208-230/460 AMP: .8-9/.45 40*C SF I, 3.5 SF AMP THERMAL PROT. NONE SHIPPING WITH FED EX WEIGHT: 35 LBS APPROX.

Jabsco Pump with 1/6 Open Motor With Neoprene Impeller Item Information:In Stock: YesSold By: EachManufacturer: JabscoManufacturer Part #: 12290-0001

Alling-Lander 5HP 1750 RPM Motor Model: BAMCQ42-A Serial: 9400620395 Input HP: 5.03 Motor Frame: 180TC Ratio :1 - 20.9 Lubed with: #4 EP UPS flat rate shipping anywhere in the 48 States: FREE International: No problem, shipping quoted on request. Thanks for looking!

PRESSURE PUMP & MOTOR HP 1 (A#99-1) THIS ITEM IS IN GOOD CONDITION AND IS SOLD AS IS. 1 HP 4P TYPE TC-F VOLTS 230/460 FRAME F-80 HZ 60 AMP 3.6 RPM 1750 SERIAL #: M 1201240 USABLE ON 208 V NETWORK AT 3.5 AMP THE RULER SEEN IN THIS PHOTO IS A YARD STICK. WEIGHT IS ROUGHLY ABOUT 100 LBS Pick up is preferred at our Congers, NY facility but freight can be arranged.

--> Manufacturer: Moyno Model: SSQ HP: 2 Type: PD H/V: H Material: SS Size: 3" GPM: 25 Ft/Hd: 31 Description: 5 - 25 GPM. 3" Flg. Inlet.

$563.00 at Graingers plus shippingBUY FROM US AND SAVE $348.00 (61.8%) Submersible Sewage pumps are designed to remove sewage waste water from a residential home or commercial office. These pumps are designed to pass the typical suspended solids associated with sewage waste water. Sewage pumps typically operate intermittently and automatically with a float switch and can accommodate solids up to 2” in diameter.