1800/8 for sale, brand-new and used.

You are bidding on 1 - 3 lineal ft roll of 36" wide, White 1/8" thick FDA Grade Nitrile Rubber Sheet in medium hardness (60 Durometer). Typical uses include gasketing and stripping. 9 square feet of material.

You are bidding on 1 - 3 lineal ft roll of 36" wide, Tan 1/8" thick Pure Gum Rubber Sheet in 40Durometer. Typical uses include gasketing and stripping. 9 square feet of material.

We have a New Sumitomo Paramax 9000 right angle gearbox MODEL PHA9050R3Y-RLF-22.4 75HP input @ 1800 RPM Gear Ratio 22.530 Input Shaft is 1 1/2" in diameter Output shaft is 4 1/8" in diameter Manufactured June 2008 Overall Dimensions 41" L x 13.5" W x 17" H **THIS ITEM IS LOCATED IN Darlington, South Carolina** Thanks for Looking and Good Luck! Email me with any questions

This WINEBCO reactor bears S/N: 00424. Rated at 3000 liter. Empty weight is 2000#.

1800 Gallon Stainless Steel Tank with Mixer Tank includes mixer but does not include the motor or gear reductionGear reduction mounting holes center to center is 8.25"Drive connector diameter is 3.5" Tank Height - 96" Tank Diameter - 76" Total height - 120" Weight for shipping is approx 2,000 LBS

0.10HP, 90V DC ELECTRIC MOTOR INC 1/2" JACOBS CHUCK This is a very nice electric motor, manufactured in USA by SPX Process Equipment. It is intended for industrial mixing applications but is suitable for a wide range of applications. Allows for a 3/8" shaft to pass thrugh the entire motor.  3.4" frame.

Fluid Dynamics GP 1058 55011 1 HP 115 VAC General Purpose Inversion Motor 13.6 AMP @ 115 VAC/6.8 AMP @ 230 VAC5" Impellers ALUMINUM4" Long 5/8" Bore SS Coupling3' Long Stainless Steel Shave 5/8" Diameter Fluid Dynamics also offers a complete line of Variable Speed VFD Driven Mixers, Variable Speed Pneumatic Mixers, High Speed (3600 RPM) High Sheer Mixers, Large Tank Mixers (500 to 20,000 gallon tanks), In-Line High Sheer Mixers (Simple Plug And Play Anywhere) and In-Line Grinder Mixers.

56813 One (1) SINA, a modular in-line system manufactured by Roth and Rau for deposition of silicon nitride, or similar silicon based layer, on wafers (flat substrates) by a continuous PECVD process. The former application was for anti-reflection coating for solar cells. The systems consists of 5 chambers, or modules, for load-lock; heating; deposition; cooling off; load-lock and includes carriers for wafers through the system.

This auction is for a used high vacuum furnace. It is a Model 1800 2570. It was Manufactured by Astro Industries of Santa Barbara, CA.