2-1-2 press for sale, brand-new and used.

This is a used but well cared for very Heavy Duty Arbor Press. Famco list it as a 3 ton with a 50 - 1ratio. It weighs 160 lbs and the dimensions are 8 inches wide by 18 inches deep and 21 1/2 inchestallI have it listed for local pickup, but I will work with the buyer through a shipping broker to crate and/or palletise the press.

3/8" CL press fit drill bushings Buy it now while they last These are in perfect condition

2 pcs. style H, headed press fit drill bushing. 3/4"(.750) I.D.X 1 3/8" O.D.X 5/8" long(under head) New surplus.

2 pcs. style P, headless press fit drill bushing. 13/16"(.8125") I.D.X 1" O.D.X 2" Long.

good used Q/C drill press socket - 2 morse taper ID Scully Jones USA 3-AA-2 2 MT ID x 1 11/16" OD please check my other auctions and happy bidding! we are always happy to combine items for cheaper shipping Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

You are bidding on a brand new Lower Die Holder for a 8 station Ultra® IMT™ LOWER HOLDER ONLY

These bars were designed for use on our 1 Ton Palmgren arbor press where they easily support 2000 lbs. over the anvil wheel slot span of less than 1.25”. They are also useful as bench blocks, shims, and set-up blocks.

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.

This tiny 4 piece press bar set measures 1/4" X 1/2" X 2" long. These were designed for use on a .5 ton arbor press where they support 1000 lbs. over the anvil wheel slot span of less than 1.06.” Edges are Hot Rolled Mill Finish, with scale, and are not ground.

We have 4 of these stocky little bars (THE GUY S IN THE BACK CALL THEM "BITTY BARS")measuring 1"X3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they easily support 12000 lbs. over the anvil wheel slot span of less than 2.75” They often find themselves over on the 30 ton “H” frame press as set-up blocks, blocking, or load spreading blocks in heavy load situations.

Up for sale is this old vintage Drill Press Lathe Auger Bit Chuck ~ thread 1-8. used, we often have more than 6 pictures with our listings. to see the 7th -12th picture, please use the scroll bar to the right of the small pictures Please, see the pictures for the condition of this item.

Quality products at affordable prices. Check out our

Quality products at affordable prices. Check out our

Here is a nice Collet/Chuck for use with a drill press, shaper, router, or lathe. The shaft is 1/2" X 20 TPI as well as the inner threads. The chuck tightens from 1/4" down to about 3/16".

This is a lightly used Heavy Duty Tilting Box Table for a Radial Arm Drill Press in EXCELLENT condition. Specifications: Top Surface Area: 20-7/8" x 21-1/2" Top T-Slots: 3 x 11/16" @ 6-1/4" centers Side Surface Area: 21-1/2" x 15-3/4" Top T-Slots: 2 x 11/16" @ 8" centers Tilting Range: 90 degrees Overall Dimensions: 21" x 22" x 21" tall Comes as shown in pictures. Skidding/Crating of items are extra costs.

Boeing UT7020-3 / Lockheed DS616-6 Slotted Locator Bushing for 3/8" Pin FEATURES: Use with L Pins, T Pins, Shoulder Pins, or Ball Lock Clamps to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. SIZES: Available for 3/16 to 1" diameter pins (6 to 25mm in metric) — see Dimensions page for part numbers.