2 cutter for sale, brand-new and used.

This sale is for ONE NOS High Speed Steel 5" Diameter x 5/16" Tooth x 1" Bore, STAGGERED TOOTH SIDE & FACE Horizontal MILLING CUTTER. The 1 inch bore has an internal parallel keyway. The cutter may have stains from original packaging grease, refer to photographs.

This sale is for ONE NOS Qualcut made High Speed Steel 4" Diameter x 3/8" Tooth x 1" Bore, Staggered Tooth Side & Face Milling Cutter. There is a 1 inch internal parallel keyway. The cutter may have some staining from old packing grease, please see photos.

This sale is for ONE NOS Qualcut made High Speed Steel 4" Diameter x 5/16" Tooth x 1" Bore, Staggered Tooth Side & Face Milling Cutter. There is a 1 inch internal parallel keyway. The cutter may have some staining from old packing grease, please see photos.

This sale is for ONE NOS Qualcut made High Speed Steel 4" Diameter x 3/8" Tooth x 1" Bore, Staggered Tooth Side & Face Milling Cutter. There is a 1 inch internal parallel keyway. The cutter may have some staining from old packing grease, please see photos.

This sale is for ONE NOS Qualcut made High Speed Steel 4" Diameter x 7/8" Tooth x 1" Bore, Staggered Tooth Side & Face Milling Cutter. There is a 1 inch internal parallel keyway. The cutter is protected in a rubber/was coating.

This sale is for ONE NOS Fujikoshi Ltd. made Natchi HIGH SPEED STEEL GEAR PINION CUTTER, No. T-78281.

(800) 967-7217

COLLINS E Z PIPE AND TUBING CUTTER. STAND WILL NOT BE SHIPPED BUT CAN BE PICKED UP. Material:

STEPHAN VCM 44 VERTICAL CUTTER MIXER Packing and shipping is not available. PLEASE READ PAYMENT AND PICK UP INSTRUCTIONS BELOW. Item is located at the New York State Office For People With Developmental Disabilities Broome Developmental

(800) 967-7217

Delta / Rockwell SHAPER CUTTER Cat.# 43-914 Cabinet LH Male Carbide Tipped Shaper Cutter 3/4" HOLE WITH 1/2" BUSHING ** While the Delta Shaper cutter cat#'s start with a 45-xxx, the Rockwell Shaper cutter cat#'s start with a 43-xxx. EXAMPLE ONLY **-- If you are looking for a Rockwell 43-905 bit you may want to also consider a delta 45-905 and Visa Versa. --** Thank you for having interest in our Delta/Rockwell Shaper Cutters.

Delta / Rockwell SHAPER CUTTER Cat.# 43-915 COVE AND BEAD RH COPE CARBIDE TIPPED SHAPER CUTTER 3/4" HOLE WITH 1/2" BUSHING ** While the Delta Shaper cutter cat#'s start with a 45-xxx, the Rockwell Shaper cutter cat#'s start with a 43-xxx. EXAMPLE ONLY **-- If you are looking for a Rockwell 43-905 bit you may want to also consider a delta 45-905 and Visa Versa. --** Thank you for having interest in our Delta/Rockwell Shaper Cutters.

Rotobrute XL200 Magentic Drill Bit Rotabroach Annular Cutter 15/16" x 2"

37cm dia x 8mm Ceramic Pizza Stone Set w cutter, spatula

&nb