2 cutter for sale, brand-new and used.

#84061 MORSE/MARXMAN CARBIDE TIPPED REBAR CUTTER 9/16" X 12" ***NEW*** DESCRIPTION: Rebar Cutter - Carbide Tipped For use in drilling through concrete-embedded reinforcing bars or wire mess Important Rebar Cutter Technical Information: Use a masonary drill or hammer bit to first drill concrete until the rebar or wire mess is reach. The drill must than be stopped at once when contact is made.

#84064 MORSE/MARXMAN CARBIDE TIPPED REBAR CUTTER 3/4" X 12" ***NEW*** Rebar Cutter - Carbide Tipped For use in drilling through concrete-embedded reinforcing bars or wire mess Important Rebar Cutter Technical Information: Use a masonary drill or hammer bit to first drill concrete until the rebar or wire mess is reach. The drill must than be stopped at once when contact is made.

In 1979, the first original patent for PVC Pipe Cutter was patented in the US by MCC Corporation. We are the creator with the idea to cut the PVC pipe in a way of scissors when people was cutting by saw. Our concept through research and development completely changed the world's view the plumbing, irrigation, waterworks, mechanical, and any industries involving plastic pipes.

In 1979, the first original patent for PVC Pipe Cutter was patented in the US by MCC Corporation. We are the creator with the idea to cut the PVC pipe in a way of scissors when people was cutting by saw. Our concept through research and development completely changed the world's view the plumbing, irrigation, waterworks, mechanical, and any industries involving plastic pipes.

The 7/8 in. Carbide Hole Cutter is ideal for installing 1/2 in. conduit and pipe.

Chicago Electric Welding 240 Volt Inverter Plasma Cutter w/ Digital Display - MSRP $1,091.99: This is one of the easiest air plasma cutter units

Hi, you are bidding on 1 Solid carbide 4 Flute Cutter. It is 3/8 " Dia. x 2 1/2" Long - With 1" cutting edge .

Hi, you are bidding on 1 Solid carbide 4 Flute Cutter. It is 3/8 " Dia. x 2 1/2" Long - With 7/8" cutting edge .

Hi, you are bidding on 1 Solid carbide 4 Flute Cutter. It is 1/4 " Dia. x 2 1/2" Long - With 3/4" cutting edge .

Hi, you are bidding on 1 Solid carbide 4 Flute Cutter. It is 7/16 " Dia. x 3" Long - With 1" cutting edge .

This cutter works just fine, has some scratches around plastic and the protection blade strip is peeling off from the end, really cheap to replace but maybe some glue will put it back to place, it does not affect the cutting if you don't need to cut at the end, everything else works just fine, the holder comes with a 45 degrees blade (used) and all the other accessories. 1-Vinyl Cutter 1-USB Cable

In 1979, the first original patent for PVC Pipe Cutter was patented in the US by MCC Corporation. We are the creator with the idea to cut the PVC pipe in a way of scissors when people was cutting by saw. Our concept through research and development completely changed the world's view the plumbing, irrigation, waterworks, mechanical, and any industries involving plastic pipes.

In 1979, the first original patent for PVC Pipe Cutter was patented in the US by MCC Corporation. We are the creator with the idea to cut the PVC pipe in a way of scissors when people was cutting by saw. Our concept through research and development completely changed the world's view the plumbing, irrigation, waterworks, mechanical, and any industries involving plastic pipes.

Delta / Rockwell SHAPER CUTTER Cat.# 43-913 CABINET RH MALE CARBIDE TIPPED SHAPER CUTTER 3/4" HOLE WITH 1/2" BUSHING ** While the Delta Shaper cutter cat#'s start with a 45-xxx, the Rockwell Shaper cutter cat#'s start with a 43-xxx. EXAMPLE ONLY **-- If you are looking for a Rockwell 43-905 bit you may want to also consider a delta 45-905 and Visa Versa. --** Thank you for having interest in our Delta/Rockwell Shaper Cutters.

Delta / Rockwell SHAPER CUTTER Cat.# 43-910 Cab LH Female Carbide Tipped Shaper Cutter 3/4" HOLE WITH 1/2" BUSHING ** While the Delta Shaper cutter cat#'s start with a 45-xxx, the Rockwell Shaper cutter cat#'s start with a 43-xxx. EXAMPLE ONLY **-- If you are looking for a Rockwell 43-905 bit you may want to also consider a delta 45-905 and Visa Versa. --** Thank you for having interest in our Delta/Rockwell Shaper Cutters.

Delta / Rockwell SHAPER CUTTER Cat.# 43-909 CAB RH FEMALE CARBIDE TIPPED SHAPER CUTTER 3/4" HOLE WITH 1/2" BUSHING ** While the Delta Shaper cutter cat#'s start with a 45-xxx, the Rockwell Shaper cutter cat#'s start with a 43-xxx. EXAMPLE ONLY **-- If you are looking for a Rockwell 43-905 bit you may want to also consider a delta 45-905 and Visa Versa. --** Thank you for having interest in our Delta/Rockwell Shaper Cutters.

SquareTrade © AP6.0

WinPCSIGN is a STAND ALONE SOFTWARE. YOU DON'T NEED COREL, RSTONES OR ANY OTHER PLUGIN Don't spend extra money in buying templates. Create your own ones or modify them.

GCC VINYL CUTTER & RED PRESS HEAT TRANSFER PACKAGE - ONLY $1,087.00! This package includes: GCC Expert II 24" Desktop Vinyl Cutter Imprintables Red Press - 16" x 20" GreatCut Software - plug in for CorelDraw or Adobe Illustrator Cad Worx Live Online Software - Free to customers (Includes Player Name Wizards, Templates, 1000's of pieces of clip art and more