2" GAMMA SCINTILLATION DETECTOR w/Bicron BC-412 Scintillator, US $189.00 – Picture 0

2" GAMMA SCINTILLATION DETECTOR w/Bicron BC-412 Scintillator, US $189.00 – Picture 1

2" GAMMA SCINTILLATION DETECTOR w/Bicron BC-412 Scintillator, US $189.00 – Picture 2

2" GAMMA SCINTILLATION DETECTOR w/Bicron BC-412 Scintillator, US $189.00 – Picture 3

2" GAMMA SCINTILLATION DETECTOR w/Bicron BC-412 Scintillator, US $189.00 – Picture 4

2" Gamma Scintillation Detector W/bicron Bc-412 Scintillator

US $189.00

Stuart, Florida, United States
Jan 30th

Open on mobile:
QR code

This listing is for a 2 inch Gamma Scintillation Detector designed for Radiation Detection. This probe has been newly manufactured in the iRad shop and lab. It is under 7 inches in length and weighs only 12 ounces. Listing is for detector only, not the meter. The detector uses a 2 inch diameter by 2-1/4 inch thick Bicron/Saint-Gobain BC-412 scintillator for Gamma Radiation Detection. I attach the scintillator to a high quality Hamamatsu R10131 Photomultiplier Tube that includes a 120 MegOhm dynode chain. After assembly if the PMT and scintillator, the detector is encased in a Black Polyolefin casing that is quite durable. The detector has been tested from 700v to 1100v and runs very well throughout that range of voltage with excellent sensitivity at 800 to 900 volts. The detector can easily be swapped out with GM probes that also run at 900 volts without changing your HV settings (on meters that support scintillation detectors). I recommend this detector if you have a Meter with adjustable HV like a Ludlum Model 3 and most all other Ludlum meters. Pictures show detection of Cs137, Co60 and a thorite mineral sample. The probe is shown operating on a Ludlum Model 18 at 800V as calibrated on my Ludlum 500 Calibrator. Voltage requirements on your meter and specific probe may vary. Operating Instructions and directions for adjusting HV and Plateau of detector are included in the sale. Detector Dimensions: Length: <7 inches (including BNC connector) Diameter: ~2 inches Weight: ~12 oz The Scintillator detector includes a BNC connector for connection to your meter. If you prefer a C type (Ludlum) connector, these are available on request, please inquire before purchase. Please see my other listings for the BNC to C adapters. Only one Scintillator Detector is included in this listing. No other items shown, including test equipment, cables, meters, test sources, or tools are included. Expedited Shipping! I ship very fast, same day if early enough, next day otherwise (except Holidays and Weekends). Packaging will be safe and secure, and I guarantee your satisfaction and no DOA. This item comes with a 30 day satisfaction guarantee or your purchase price back upon return of all items in same condition as sent. Thank you for looking. Please don't forget to see my other items.

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Newly manufactured in the iRad lab using new and refurbished parts.”