22 x 500 for sale, brand-new and used.

Click here to request a quote with price on this stock number from Gray Machine Specification for Stock # 11019

MAZAK SQT 250MY CNC 4-AXIS TURNING CENTER LATHE WITH Y-AXIS AND LIVE TOOLING General Specifications Max. Swing 20.67 Max. Cutting diameter 11.81" Max.

NEW Bessey BC 220V Reco Induction Bearing Heater 22-Inch O.D.x 7-Inch W, 220 Volt

NEW Bessey BCS 440V 50HZ Reco Induction Bearing Heater 22-Inch O.D. x 11-Inch W, 440

Payment Policy Brand New Sony CyberShot 8 MP Di

Vacuum Tables, Vacuum Table, Vacuum Clamps, Vacuum Pods and T-tracks from Clampusystems.com

THIS IS A PRECISION 12" SQUARE TOMBSTONE FOR HOLDING WORK ON A CNC HMC,IT IS 20" HIGH, THE BASE IS 19.25 SQ AND 2" THICK AND HAS 45 HOLES PER SIDE. WALL THICKNESS IS 2 INCH,,ALL HOLES HAVE A .500 HARDENED BUSHING 5/8 DEEP AND A 1/2 X 13 HELI COIL, SO YOU CAN LOCATE OR HOLD DOWN ON ANY HOLE, AND ARE ON 2.000 CENTERS. REPLACEMENT COST IS OVER 4000.00 DOLLARS.

Preowned 72" x 96" GIDDINGS & LEWIS Extra Heavy Duty Manual Hydrostatic Lift Rotary Table, S/N: 040-1458-74 (New 1974) Size of platen Size of base Overall height Number of t-slots Approximate table load capacity on center (centrally located) Approximate table load capacity for heavy off center work loads at 34" radius Approximate table load capacity&nb

ebay template

AirGas High-P

Spanish & English Speaking Sales Agents Available 6-ALIKE 393 TON EEMCO HEAVY DUTYY SLAB-SIDE PRESSES* NEW 1978 & 1979*

ebaybody Brother Label Maker Tape Cartridges 1 Length 1 Roll 1000 Roll Direct Thermal

ebaybody Samsung CLT W504 Waste Toner Container Laser 14000 Page Black 3500 Page Color

EntrePack Shrink Wrap Tunnel Machine Model T1710 The EntrePack T1710 is a fully automatic shrink tunnel machine that can shrink most common shrink wrap materials including POF and PVC. The EntrePack T1710 has separate temperature and speed controls to apply the correct amount of heat to each s

Horizontal Flow Wrapping Machine Like new used less than 50 hours New Cost: $ 22,500.00

Made by Pulian This is a "sound proof" (according to the manufacturer) granulating machine / power crushing machine in good used condition. The entire inside of the machine is insulated with sound-absorbing foam, which greatly reduces the noise this machine makes. Note that the latches for the door below the hopper are broken as shown in the second photo above.

Machine Information Lot Number

1991 500 TON TOYO PLASTIC INJECTION MOLDING MACHINE Model: TM500 Serial #: 1048002 Control: PLCS-6 Shot Size: 61.5 ounce