225/25 for sale, brand-new and used.

Klein Tools Insulated Universal Side-Cutting Pliers - Connector Crimping Cat. 12098-INS Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol. Two layers of insulation provide protection against electric shock.

CHANNELOCK 349 9.25" LINEMEN'S PLIERS 349 9 inch Linemen's Plier WIREMASTER SPECIFICATIONS: Length (in):

Sold Elsewhere as the CWS2 for $1645, we sell the same model for $1225. This particular machine was used one day and was traded in for larger WS2 machine instead. So this machine has a few minor scratches from the wire going through, but still like new and under warranty.

Lot of ( Qty. 41 ) used Fuse Holders, item specifics listed below: ( Qty. 2 ) JLM-1-1RLS5-30140-225, MAX.

Battery chargers, rectifiers, dc power DC/Telecom Filtered Battery Charger/Rectifier

Snap on Electronic torque tester 40-400 #QC1ETT400 Designed to be a sturdy, low cost tester, these electronic torque testers can be placed on the wall in the factory or on a bench to allow operators to test torque wrenches or power tools without having to leave their station. Integral transducer and sturdy housing allow mounting in virtually any position. Integral Transducer: Full bridge strain gauge, 350 ohms, 1500 µE, 3mV/V F.S., 3.75V excitation.

Large Aluminum Heatsink, 12" x 8.35" x 2.0". Weighs approx 2.69 kg (just under 6 pounds) For modeling, Base is 0.25" thick, each fin is 0.198 at the base tapering to 0.11" at rounded tip Looks like its Wakefield xx4937 profile which has 0.9 C/W at 3" of length, so the entire piece is approx. 0.225 C/Watt 4 available more info available here: http://www.wakefield-vette.com/products/natural-convection/thermal-extrus

Parameters for Heat sink

(25) NEC UPB569G SOP-8 (225 mil) 500MHz Low Voltage Dual Modulus Prescalers New Surplus Stock. $2.00 First Class Shipping. No International Shipping on this item.

You are purchasing 2x ATMEGA8-16PU ATMEL DIP-28 8-bit Microcontroller IC

include("http://t.pushauction.com/ebaystore_style/js

2564XE1C.13 New CW Industries GF Series Panel Mount, 3 Terminal, 2 Position, Single Pole Double Throw (SPDT) Slide Switches, 6A 125VAC .5A 125VDC, CSA & UL Approved, Part Number GF-624-0039C, or GF6240039C, or GF6240039, or 118214. Each bid quantity is for a Lot of Ten (10) Switches. You may bid / buy any number of lots, up to the total quantity available above.

Anaren Microwave 1R0260-3 Caseless 90 Degree Hybrid Coupler 3dB =NOS=

LOT QUANTITY: 25 fuses PART NUMBER: 225005 MANUFACTURER: Littelfuse DESCRIPTION: 5A 125V 2AG 225 5x15mm Fast Acting Fast Blow Fuse