This is a lot of 20 sets of Electronic Hardware. I bought this hardware about 35 or 40 years ago from a US Navy Facility that closed. All are New, very OLD stock.
THIS ITEM IS FOR 1 (one): CTS POTENTIOMETER 5K (5,000) OHMS AUDIO TAPER (measures 1.5K at approx. 50% rotation) MARKED: -1377407 306024 DIM: 7/8" DIA X 7/16" BEHIND PANEL SHAFT: 1/4" X 1/2" LONG New, old stock, with washer, mounting nut. (ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED)
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): OHMITE CU-1011 TYPE AB WITH A CUT DOWN SHAFT 100 OHM 2 WATT POTENTIOMETER MARKED: CU-1011, MADE IN U.S.A. LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 7/8" LONG
LOT OF 1 (ONE): BOURNS 3852Z-AB4-504A PANEL MOUNT POTENTIOMETER 500K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/16"L, D flat. 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwasher. Buyer pays S&H, $2.95 in USA, $7.95 worldwide.
LOT OF 1 (one): ALLEN-BRADLEY TYPE J SHORT SHAFT 100 OHM 2 WATT POTENTIOMETER LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHORT SHAFT: 1/4" X 1/8" LONG MADE IN USA New, old stock, with washer, mounting nut. (ALL POTS I SELL, NEW OR US
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): CLAROSTAT #380C1 LONG SHAFT 25K (25,000) OHMS 2 WATT POTENTIOMETER MARKED: 380C1 - 100K-S LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 1 9/16" LON
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): CLAROSTAT * TYPE J * LONG SHAFT, DUAL (yes, Type J. Looks just like A-B) 2.5K (2,500) OHMS 2 WATT POTENTIOMETER MARKED: JD1N200P252UA LINEAR TAPER DIM: 1 1/8" DIA X 1 1/8" BEHIND PANEL VOLTAGE: 500 RMS SHAFT:&n
OHMITE STK # CU-3552 3.5 MEG OHM TYPE AB 2 WATT POTENTIOMETER LINEAR TAPER DIM: 1.16" DIA X 0.625" BEHIND PANEL SHAFT: 1/4" x 1 5/8" LONG ROTATION: 312 degrees VOLTAGE: 500 RMS New, old stock, with washer, mounting nut. Tested and guaranteed good. MADE IN USA Buyer pays S&H, $
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): CLAROSTAT 1K (1000) OHM 2 WATT POTENTIOMETER MARKED: CM42-724 LINEAR TAPER DIM: 1 1/8" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 3/8" LONG
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) LOT OF 1 (one): OHMITE CU-2531 WITH A CUT DOWN SHAFT 25K OHM 2 WATT POTENTIOMETER MARKED: CU-2531 LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 1/2" LONG
THIS ITEM IS FOR 1 (one): CENTRALAB W.W. LONG SHAFT POTENTIOMETER 4K (4,000) OHM 5 WATT POTENTIOMETER MARKED: WW-402 LINEAR TAPER DIM: 1 1/8" DIA X 9/16" BEHIND PANEL SHAFT: 1/4" X 2 9/16" LONG MADE IN USA NEW, OLD STOCK with mounting nut. (ALL POTS I SELL, NEW OR US
THIS ITEM IS FOR A CLAROSTAT TRIPLE POTENTIOMETER TRIPLE POTENTIOMETER 5K OHM front / 4K OHM middle / 1.25K back LINEAR TAPER RATED: 2 WATTS DIM: 1" OD X 1 3/4" DEEP SHAFT: 1/4" X 7/16"L NEW, OLD STOCK WITH MTG. NUT & LOCKWASHER. MADE IN USA Buyer pays S&H, $2.75 in USA, $9.75 worldwide.
** ALL POTS I SELL ARE TESTED AND GUARANTEED GOOD ** LOT OF 1 (one): CTS VINTAGE POTENTIOMETER W/SWITCH 500K OHM (500,000) +/- 20%, AUDIO TAPER SWITCH: TYPE GC RATED 3A - 125vAC, 1A - 250vAC SPST - N.O. (looking at shaft, full CW, is CLOSED, ON. CCW to max rotation is open, off.
THIS ITEM IS FOR 1 (one): OHMITE CU-2552 TYPE AB WITH A CUT DOWN SHAFT 2.5 MEG (2,500,000) OHM 2 WATT POTENTIOMETER MARKED: CU-2552 LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 1/2" LONG MADE IN USA Refurbished with washer, mounting nut
*** ALL POTS I SELL (NEW OR USED) ARE TESTED AND GUARANTEED GOOD*** THIS ITEM IS A: CTS 10K (10,000) OHM POTENTIOMETER WIRE WOUND, LINEAR TAPER RATED: 2 WATTS (maybe more) PANEL MOUNT MARKED: KS-8680 10K CTS 6731 (date code 1967?) Made in USA (I think, not marked) DIM: 1 1/2" OD X 11/16" DEEP
THIS ITEM IS FOR 1 (one): OHMITE CU-5001 TYPE AB WITH A LONG SHAFT 50 OHM 2 WATT POTENTIOMETER MARKED: CU-5001, MADE IN U.S.A. LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 1 5/8" LONG MADE IN USA Refurbished with washer, mounting
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
