3 4 16 nut for sale, brand-new and used.

THIS ITEM IS FOR 1 (one): OHMITE CU-1021 TYPE AB LONG SHAFT 1K (1000) OHM 2 WATT POTENTIOMETER MARKED: CU-1021 LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 1 9/16" LONG MADE IN CANADA New, old stock with washer, mounting nut.

10 - Pieces 50K-Ohm audio taper potentiometer with nut. 1/4"-shaft 3/8"-long 3/8"-mounting hole 15/16"-diameter x 3/8" Maximum shipping for this item: $3.50 Maximum combined shipping: $6.00 Please view our other auctions.

Potentiometer Clarostat 58 Series Wire Wound 4 Watt with Switch 58 Series offers a rugged construction and a wirewound element Element Type: Wire Wound Terminal Type: Solder lug Power Rating: 4 W Resistance Range: 25 Ohm to 25 kOhm Bushing Type: Locking, Standard Rotational Life: 25,000 cycles Potentiometer Type: Industrial Electrical Taper: Linear Shaft Length: 2 Inch Mount: 7/16" chassis hole with mounting nut. See pictures for additional details.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): OHMITE TYPE AB DUAL POTENTIOMETER 100K-100K (dual 100,000) OHM 2 WATT POTENTIOMETER OHMITE P/N: CCU-1041 Made in USA LINEAR TAPER DIM: 1 1/8" DIA X 1 1/8" BEHIND PANEL VOLTAGE: 500 RMS

LOT OF 1 (one): OHMITE CU-2541 TYPE AB SHORT SHAFT 250K OHM (250,000) 2 WATT POTENTIOMETER MARKED: CU-2541 LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT (cut down): 1/4" X 5/32" LONG MADE IN USA Refurbished with washer, mounting nut.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) LOT OF 1 (one): OHMITE CU-2531 WITH A CUT DOWN SHAFT 25K OHM 2 WATT POTENTIOMETER MARKED: CU-2531 LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 3/8" LONG

*** ALL POTS I SELL (NEW OR USED) ARE TESTED AND GUARANTEED GOOD*** THIS ITEM IS A: CLAROSTAT 20 OHM POTENTIOMETER WIRE WOUND RATED: 4 WATTS PANEL MOUNT Made in USA P/N: A58-20 DIM: 1 5/8" OD X 3/4" DEEP SHAFT: 1/4" X 5/16"L Refurbished with mounting nut and

2917XG2I.04 New / Old Stock Vintage 1K M-Lin Potentiometers 3/4 Turn w/ Mounting Hardware, Carbon Panel Mount, Part Number 20-6630 or L33946. Each bid quantity is for One (1) Potentiometer. You may bid / buy any number, up to the total quantity available above.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): CTS TYPE 320 DUAL CONCENTRIC POTENTIOMETER WITH KNOBS 10K-10K (dual 10,000) OHM 2 WATT POTENTIOMETER Concentric shafts (1/8" inside of a 1/4" shaft) Made in USA LINEAR TAPER DIM: 1" OD X 1" BEHIND PANEL SHAFTS: 1/4" X 1/4"L &

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) LOT OF 1 (one): OHMITE CMU-7542 750K (750,000) OHM 2 WATT POTENTIOMETER MARKED: CMU-7542 / RV4NAYSD754B LINEAR TAPER DIM: 1 1/8" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" X 1/2" LONG

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one):MALLORY P/N M3500P 4 WATT POTENTIOMETER 3500 OHM 4 WATT WIRE WOUND POTENTIOMETER MARKED: M3500P LINEAR TAPER DIM: 1 5/8" DIA X 9/16" BEHIND PANEL

10K / 100K Dual Linear Potentiometer 10K / 100K Dual Potentiometer With Solder Lugs 10% Tolerance 100K Top---10K Bottom 1/4" Half-Moon Shaft Bushing: 3/8" Shaft Length: 5/16" Diameter: 15/16" / 24mm Comes with hardware; nut and washer. US Buyers Please Note: Returns and exchanges are accepted within 14 days of the receipt of your item. Please check your item after you receive it, no

THIS ITEM IS FOR: 1 (one): ALLEN-BRADLEY TYPE J SHORT SHAFT 500 OHM 2 WATT POTENTIOMETER LINEAR TAPER DIM: 1 1/8" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHORT SHAFT: 1/4" X 1/4" LONG MADE IN USA New, old stock, with lock washer & mounting nut.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): CLAROSTAT # CM30 50K OHM (50,000) 2 WATT POTENTIOMETER MARKED: CM30245 50K MADE IN USA. LINEAR TAPER DIM: 1" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/

LOT OF 1 (one): OHMITE STK # CMU-1041 100K OHM TYPE AB 2 WATT POTENTIOMETER MARKED: RV4NAYSD104A / CMU-1041 LINEAR TAPER DIM: 1.16" DIA X 0.625" BEHIND PANEL ROTATION: 312 degrees VOLTAGE: 500 RMS SHAFT: 1/4" SLOTTED X 1/2" LONG New, old stock,

About us Shipping Payment

0,75 kW Q

DESCRIPTION