3 4 end mill for sale, brand-new and used.

New old stock Weldon SKX 8-2A 1/4" 3/8" shank 2 flute end mill. New old stock Standard Tool Co. 7/16" List 769-4P 4 flute single end 1/2" shank Helix End mill.

Niagara Cutter N79558 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 30 Degree Helix, 6 Flutes, 5.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter

Niagara Cutter1.500" Diameter x 2" Cut x 4" O.A.L. x 1.250" Shankw/ 3/16" Diameter Thru HoleNEW For sale is this end mill from Niagara. The information on the shank is as follows:

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

Please note: this is not a centercutting end mill. It is brand new in the original container. I try to give as accurate of a description as I can and point out any flaws that I notice in an item.

2 New Niagara Cutters Per Lot

Hertel Square end End Mill 1/32" Mill Dia. 4-Flute, 1-1/2" Long, Carbide ~ Single Square End Mill Mill Diameter (Inch): 1/32 Number of Flutes: 4 Material: Solid Carbide Length of Cut (Inch): 3/32 Finish/Coating: Uncoated Overall Length (Inch): 1-1/2 made in USA

25 cutting bits or tools, only counted the ones i thought was worth counting. Partial list 1/2 inch ST End mill 2 lipped looks good,,, 7/16" Cleveland End Mill 2 lipped double end looks good,,, 1/4 " Cleveland end mill 2 lipped right hand double end, looks OK,,, 1/4" DE-30 T-J 3 lipped double end mill end,,,Looks OK,,, 1/4 " Doall D-611 2 lipped Double end end mill Looks OK,,, 1/4" 2405 Double end 2 lipped one end is bad,,, 3/16 3 deg.

Description: Lot 10 pcs HSS Endmills 4 Flute End mills Cutting Dia 5mm Milling tools Specification: Cutting dia: 5mm Shank dia: 6 mm

Corner Rounding End Mills | Radius (Inch): 7/16 | Mill Diameter (Inch): 1-3/8 | Number of Flutes: 4 | Material: High Speed Steel | Finish/Coating: Uncoated | Single or Double End: Single Product Specifications Radius (Inch) 7/16 Mill Diameter (Inch) 1-3/8 Number of Flutes 4 Material High Speed Steel Finish/Coating Uncoated Single or Double End Single Shank

You are buying one new old stock Cobalt 6 flute 1/2 ball end mill with 1-1/4" LOC. I will be adding more Import and high quality machinist tooling in the next few days. Check out my other items or send me an email if you are looking for something specific.

One new 4 flute 1/4 X 3/8 single end mill. As you can see in the picture this end mill is made in China. The plastic box is marked 3/8 but the end mill is 1/4.

** New Old Stock 3/4 Dia 4 Flute Double End Helix Mill D-4366 National Co ** 3/4 Diameter Shank / List # D-4366 / " 4300 " Center Cutting This end mill is new old stock, but does contain a small chip on one of the flutes at the very end ( refer to picture #3 ). Measures 5 3/4" in length. Please look closely at all pictures to determine condition for yourself.

Description: 5pcs Carbide Endmills 4 Flute Cutting Dia 1.0mm End mill HRC45 mills bits Specification: Cutting dia: 1.0mm Shank dia: 4 mm OAL: 50

Description: 5pcs Carbide Endmills2 Flute Cutting Dia 1.0mm End mill HRC45 mills bits Specification: Cutting dia: 1.0mm Shank dia: 4 mm OAL: 50

Description: 10pcs Carbide Endmills 2 Flute Cutting Dia 1.0mm End mill HRC45 mills bits Specification: Cutting dia: 1.0mm Shank dia: 4 mm OAL: 50

3/4" Fastcut Tool HSS M7 end mill, 1/2" SHK, 4 Flute, 5/8" LOC, 2-5/8" OAL 1 PC NEW 1/2" High Speed Steel Bridgeport finishing end mill 2 Flute

5/8" x 5/8" x 1-5/8" x 3-3/4" 3 flute Cobalt Brubaker TiCN Rough End Mill CUTTER DIAM: 5/8"SHANK DIAM: 5/8"LENGTH OF CUT: 1-5/8"OVERALL: 3-3/4"EPP#: 77804COATING: TiCNHELIX ANGLE: 41 DEGREES

5/8 x 5/8" x 1-3/8 x 3-1/2" R20-4 HSS Ball End Mill 2 flute Weldon Tool end mill - E41 Mill Diameter: 5/8" Number of Flutes: 2