3 4 inch bolt for sale, brand-new and used.

You are buying a qty of 19 Blind rivnuts these a .138" X 32 TPI or for 6-32 screws. This are new Mil-Spec fastners used on Aricraft and military vehicle and equipment. Designed for a grip length of .2 - .24" PN# MS27130-11 or MS27130-S9 or NAS1329506-160 NSN 5310-00-899-5011 YOU GET FREE SHIPPING on the second one!

I am not an expert on precisely how to measure these. I hope the photos help. These bolts have not been used.

Grieve Gas Fired Burn-Off Furnace (Inv.33074) Max. Temp 1650 Degrees F Power 480 Volts, 3 Phase, 60 Cycle Largest Motor 3/4 HP Heat Input 500,000 BTU Fuel Natural Gas at 10 Inch 14 Inch W.C. Pressure Serial Number 690018 Job 4538LA0198 Last Calibrated 7/30/14 Due 1/28/15 Three openings 10 In

Custom Designs (747)666-5155 Shop with Confidence At Custom Designs we believe t

KWIKSET Used but not abused very workable lock installation jig, I just saw one like this go for $174.00 here on ebay This has an installation jig for 2 3/8, 2 3/4, and 5 inch back set, 2 1/8 and other drills, strike and bolt markers, chisels and other things. all in a sturdy two clasp carrying case.

This is used and in good condition. It has two ports. Both of the ports are for 1 1/2 inch tube with Varian six bolt CF flanges.

Free shipping On All Orders $75 And Up

SIDE MOUNT FLANGE SPEED REDUCER, PAPER CONVERTING MACHINE COMPANY PART #3984 RATIO, 5:1 INPUT HP, 2.32 @1750 RPM OUTPUT TORQUE INCH POUNDS, 371 INPUT MOTOR DIMENSIONS, FLANGE IS 4 1/8" SQUARE WITH 4 THREADED BOLT HOLES 3 1/4" CENTER TO CENTER, THE PILOT BORE IS ABOUT 3 3/4" AND THE BORE FOR THE MOTOR SHAFT IS 19 MM HOLLOW OUTPUT, 30 MM THIS SPEED REDUCER HAS NOT BEEN USED.

Custom Designs (747)666-5155 Shop with Confidence At Custom Designs we believe t

Custom Designs (747)666-5155 Shop with Confidence At Custom Designs we believe t

Custom Designs (747)666-5155 Shop with Confidence At Custom Designs we believe t

Custom Designs (747)666-5155 Shop with Confidence At Custom Designs we believe t

You are buying all of the following: Greenlee 2, 1 1/12, 1 1/4, 1, 1, 3/4, 1/2, 1/2 inch knockout punch diameter 1) Greenlee 737 leather case in good condition, one 1/2 inch tear on left edge, see first pic, straps and buckles and seams all in good repair2) Greenlee 735 leather case in very good condition, straps and buckles and seams all in good repair Greenlee 737:

Swivel snap heavy duty solid bronze, Lot of 50 For strapping square eye. 3/4 x 3 inch SWL 165 Heavy duty great for animals. or anything you can think of.

Plans to build the Super Stirling Engine Fan This fan was designed to be a real workhorse. Every effort was made to reduce friction to an absolute minimum while at the same time making the unit extremely reliable, maintenance free, quiet and very long lived. My fan has many hundreds of running hours on it while at shows and in my office during summer months with no maintenance, service or repairs of any kind done, or needed.

TradingAssistantIndia

-------------------------------------------------------------- **** Special limited stock sale pricing **** ----------------------------------------------------------------