3 4 inch bolt for sale, brand-new and used.

Stepper Synchronous motor 72 rpm 120 V Slo-Syn SS250 Unused This is an unused sychronous stepping motor made by Superior Electric, model SS250. Lightly shelf worn paint due to long term storage Bidirectional Start, stop and reverse within 25 milliseconds 72 RPM 250 oz in. @ 72 RPM Step angle: 1.8 degrees, equal to 200 steps per revolution Continuous duty 120 VAC 0.6 A Motor dimensions: OD: 4.21 inches Length: 4 3/4 inches + shaft length Shaft dimensions: Diameter: 3/8 inch Length: 1 3/16 inches

THIS LISTING IS FOR ONE RAM PAC 10 TON HOLLOW CYLINDER AND PUMP SET. THIS IS TOP QUALITY AMERICAN MADE, NEW EQUIPMENT. THE RAM HAS A 2.5" STROKE AND IS NEW BUT NOT IN ITS ORIGINAL SHIPPING CONTAINER.

you are bidding on QTY 1 Thomson linear actuator. First picture is the actual product you will receive, other pictures are from applications which these actuators have been used. This is a brand new unit, and has never been in service, but has been cycle tested to ensure it works properly.

You are buying the actual item shown in the photo and described below: These are Brand New Anchor Bolts. High Quality ITW Red Head Concrete Anchor Bolts WS-1226 1/2" X 2-3/4", use 1/2" drill Package of 25 bolts with wedges, washers, a

The Hillman Group The Hillman Group 4277 1-5/8 In. Stainless Steel Screw Eyes Lag Thread (10-Pack) Item Package Quantity: 1 A screw eye is a bolt with a loop fashioned at the non-threaded end and a lag thread screw on the other. Great for light-duty applications, it is made with steel for strength and is designed to attach cables to surfaces.

PN 74750 (Standard Drum, Air Clutch) SERIES 20XL Great for Wreckers, Trailers, o

Bed extension off a 3520 powermatic wood lathe. Measures 50 inches long and 36 inches to the top with leg attached. Was purchased to turn columns but never used.

FREE SHIPPING TO YOUR LOCATION INCLUDED! No Hidden Charges! (If you need liftgate delivery, please tell us so we can set that up before shipping, no charge for it but we must know) This Listing is for a: BRAND NEW PM-25MV Vertical Bench Type Milling Machine with chip tray, as shown.

FREE SHIPPING TO YOUR LOCATION INCLUDED! No Hidden Charges! (If you need liftgate delivery, please tell us so we can set that up before shipping, no charge for it but we must know) This Listing is for a: BRAND NEW PM-25MV Vertical Bench Type Milling Machine with the stand and chip tray, as shown.

Aluminum Tool Stilts

New old stock 3/4 inch by 4 inch - 10 thread per inch Hex head Grade 8 BoltZinc coat Buy it now is for one item Purchase as many as you like up to the Qty listed Shipping will be at actual amount by weight Getting ready to move starting price is below my cost.

I have one support arm for a sheet metal shear. Not sure what BRAND it came off of. Its 13 inches over all length 12 inch slot 1/2 wide slot 2 1/8 wide Mount surface is 4 1/2 wide 2 3/4 high 2 7/8 center bolt holes.