3 4 keyed shaft for sale, brand-new and used.

start_elivehelp_btncode end_elivehelp_btncode

Manufacturer: Hydreco Part Number:

3/4 hp motor 1725 rpm 110/230 vot single phase 5/8'' shaft keyed this motor is reversible .

You are Buying Used 5 Hp Tecumseh HS50 Recoil Start Horizontal Shaft Engine this has Heavy Duty Recoil Starter and Solid State Ignition also has Starter ring on Flywheel for Electric Starter,This was send out to small engine shop to make sure it run,s perfect, Cleaned Fuel tank Renewed Carburetor Renewed Spark Plug Renewed Air Filter, Crank size 3/4X21/4 with 3/16 keyed 3/8X 24 Threaded

Brand NameEaton Char-Lynn

You are Buying Used Running 4 Hp Kohler K91T Horizontal Shaft Engine, Crank size 3/4X21/4 with 3/16 keyed Crank,Sprayed Fuel in Carburetor started run for several minutes ran out of fuel Good Compression Good Spark All Fluids will be drained, This will be shipped in wooden crate Email me on shipping to get correct shipping price..

1730rpm, 208-220/440V, drawing 6.1-5.8-2.1 amps respectively. Frame is 184. Output shaft is keyed 3/4" diameter.

This smooth turning motor is 230/460V, drawing 7.1/3.55 amps respectively and turning at 1160 rpm. Frame 184T. Can be used on 208V system up to 7.7 amps.

This is an unused Dayton motor / blower assembly, originally intended for use with an Airflow Systems DTH-1700 downdraft table. The motor is a Dayton VM3500T, 1 1/2HP, 3450RPM, 230/460VAC, 3 Phase with the specs listed below. The blower is 10 1/2" in diameter, cast aluminum, with six blades.

INGERSOLL RAND MULTI VANE AIR MOTOR MODEL M007RVR037 BR4 SN. SP02H31718 TORQUE - 56 FOOT LBS. MAX RPM - 498 KEYED SHAFT 4 BOLT FACE MOUNT NOS , UNUSED IN ORIGINAL BOX WITH OPERATING AND MAINTENANCE INSTRUCTIONS SHIPS NO COST TO LOWER 48 STATES - ONLY >>>> CAN SHIP EXPRESS OR WORLDWIDE ON YOUR UPS / FEDEX ACCOUNT NO.

NEW OLD STOCK MUST GO Hydraulic Motor, Displacement 5.9 cu in/rev, Mount 4 Bolt, 1.75 In Pilot, Keyed Shaft Type, 585 Max RPM, 1/2-14 NPTF Port Thread, Pressure Rating 2400 PSI, Shaft Dia 1 In, Shaft Length 1.75 In, Min Oil Viscosity 100 SUS, Max Oil Temp 180 F, Length 5.72 In, Width 3.31 In, Height 3.31 In

You are Buying Used Running 4 Hp Kohler K91 Horizontal Shaft Engine, Crank size 3/4X21/4 with 3/16 keyed Crank,Sprayed Fuel in Carburetor started run for several minutes ran out of fuel Good Compression Good Spark All Fluids will be drained, This will be shipped in wooden crate Email me on shipping to get correct shipping price

UP FOR SALE GENERAL PURPOSE USE MOTOR , HERE ARE THE SPECS : Motor Design 3-Phase Motor Enclosure Design Totally Enclosed Fan-Cooled HP 3/4 Nameplate RPM 1750 Frame 56 Voltage 208-230/460 Hz 60/50 Phase 3 Full Load Amps 2.6-2/7/1.3 No. of Speeds 1 Motor Mounting Type Rigid Base Motor Mounting Position All Angle Motor Thermal Protection None Ins. Class F Motor Service Factor 1.25 Motor Bearings Ball Frame Material Steel Max.

You are Buying Used 5 Hp Tecumseh OHH55 Enduro Over Head Valve Recoil Start Horizontal Shaft Engine this has Heavy Duty Recoil Starter and Solid State Ignition This was send out to small engine shop to make sure it run,s perfect, Cleaned Fuel tank Renewed Carburetor Renewed Spark Plug Renewe