3 4 keyed shaft for sale, brand-new and used.

This is a Variable/Adjustable Pulley Congress Tool & Die Co 4" Detroit U.S.A. 5/16"- 3/4" belt sizes5/8" keyed shaft holecurrently seems stuck at widest setting but with a little effort should be just finein good condition!

Lot of two arbors – 1 1/4 ” diameter shank and shaft. 3” shanks. 3/8” shaft depth.

This is a Quick-Grip Screw-Clamp Saw / Sprocket Arbor Adapter used to fasten a saw blade or sprocket with a 1-3/8" bore onto a 1/2" diameter shaft. Here's how it works:1) Remove the clamping nut2) Slide the adapter into position on the 1/2" shaft3) Place the saw blade or sprocket (up to 1/4" thick) with a 1-3/8" bore onto the adapter4) Replace the clamping nut and tighten to secure onto the shaft This only takes a minute and you are ready to go! The nut is 1-5/8" across the flats and abou

Product Specifications Part Number SF 2 11/16 Bore Diameter 2-11/16 inches

MFG: UNKnown Category: Misc Part/Model # ARBOR/SHAFT 30"X2.439" Description: SAW SHAFT, LEFT HAND THREADS 2" OD X 2" L 4 THREADS PER INCH, 2 BLADE CLAMP DISCS 6-1/4" OD 1 FIXED ON SHAFT 1 REMOVABLE, KEYED END OF SHAFT 3-5/8" L X 1.935" OD 1/2" KEYWAY X 3-5/8"L., SHAFT WEIGHS 47 LBS. SPOTTED LIGHT RUST. PLEASE REFER TO PHOTOS.

Mdl: 700 series.S/N: F72630B3J. Rated for 1.5 hp with an Output torque of 1300. Ratio 30:1 for 1750 RPM motor.

NEW LIGHTNIN 3/4 HP MIXER MOTOR

NEW CHEMINEER 10 HP MIXER GEAR DRIVE

PICK UP ONLY We have 13 Pcs. of high quality steel arbors that were made for a large concrete saw. Length is 12.5 " O.A.

Spinning L Shaped outside door and rear deck locking latch. Handle spins 360 degrees when locked to help prevent break in. Fits right and left hand doors.

more inventory here: http:// Looks like Never removed from crate! Believe its new old stock. Has no gibs and no knives with this head.

2130N003.30 New Penn Universal Cam Cylinder Locks, Manufactured in USA for Flextronics America, LLC; Penn Part Number A2245-0000-00, Flextronics Part Number 497-0427478. Each bid quantity is for a Lot of Two (2) Locks, Two (2) Mounting Nuts, and (4) Matching Brass Keys (Key Number N003). You may bid / buy any number of lots, up to the total quantity available above.

This is a listing for a Masterflex Easy-Load I/P 77601-60 Pump Head W 56C Motor Adapter, 6K233D Motor, Very dirty, but functional. Came out of a solar panel manufacturing plant What you will get: 1 Masterflex Easy-Load I/P 77601-60 Pump Head (Masterflex I/P Easy-Load pump head, PPS housing/SS rotor) 1 56C Motor Adapter (17.8 to 1 Speed Reduction) 1 Dayton 6K233D Magnetic Disk Brake (Sells on Granger for $303.25)

You are bidding on a new PROTECH 51-42179-01 Condenser Motor 1/3 HP 208-230/1/60 1075 rpm/1 speed Description These motors are OEM replacements for Rheem and WeatherKing or Sure Comfortmodels; additionally they may be suitable for aftermarket retrofit in many other applications. Specifications

tem Specifics

Thank you for checking out our store items! We do ship worldwide and will combine multiple items to make shipping cheaper for you where possible. ****WE DO SELL WORLDWIDE SO ASK FOR SHIPPING PRICE**** REDUCTION GEARBOX ASSEMBLY WITH CLUTCH BRAND NEW 2:1 RATIO FITS SOME HONDA GX 160/200 5.5/6.5 HP ENGINES MUST HAVE 20MM SHAFT

BRIGGS AND STRATTON CRANKSHAFT, BRAND NEW PART NUMBER 261428 INTERCHANGES WITH PART NUMBER 260609 FITS STANDARD & I/C 7hp ENGINES WITH 1" DIA X 3.7/8" LONG CRANKSHAFT WITH 1/4" KEYWAY TAPED 7/16-20 ON END (MEASURES 3.9/16" FROM MOUNTING FLANGE TO END OF SHAFT ON THOSE ENGINES EQUIPPED WITH FLANGE MOUNTING COVER.) FITS ENGINES 170400, 174400, 175400, SERIES AND SOME OTHER MODEL NUMBERS.

Commercial Quality 18 hp Briggs & Statton I/C Engine Model 422435Nice replacement or update for your application For sale here is a ran but like new Briggs & Stratton 18 hp, 694cc I/C (Industrial / Commercial) opposed twin cast iron cylinders, electric start (battery cable included), with a provision to pull start it if necessary, These are take outs from Military portable cold water generators. They were ran at the generator manufacture's fac

You are Buying Briggs Stratton 3Hp Model 80232 Recoil Start Horizontal Shaft Engine, 3/4"X21/4X1/4X28 Treaded and Keyed Crank,Starts and runs Perfect.

Item listed is a Used Briggs & Stratton 5hp Horizonal Shaft Snow Blower Engine. This was originally installed on a Montgomery Ward's Snowblower, Based on my inspection this doesn't appear to have a lot of hours on it. The Cylinder looked good and still has cross-hatches visable from when the block was machined.