3 4 keyed shaft for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

This is a Heavy Very Very nice Baldor Motor Made in the USA LIGHTLY USED from a Wood Lathe. Retails new for over $300 Some dust and dirt wear and tear scratches but In good working shape. It has a 5/8" diameter keyed shaft @ 1 3/4" Long with key and an on/off switch.

Vickers usable pump recently taken from ford tractor, 1" inport shaft length 2 1/2" Diameter 3/4" keyed PAYPAL ONLY!! BUYER PAYS RETURN SHIPPING!!

NEW SEW EURODRIVE .75 HP ELECTRIC MOTOR

ITEM #: 13032 USED 20HP AC MOTOR - 256T PACEMAKER SERIES1.62"? X 4" LONG KEYED SHAFT. 230/460 VOLT, 1745RPM, 256T FRAME, 60HZ, 3PHASE.

DAYTON 4GZC4 Motor, 3 Ph, 15 HP, 1770,208-230/460, Eff 93.0 You are purchasing a NEW motor. Specifications: Item General Purpose Motor Motor Application General Application Motor Design

This listing is for 1 Baldor Industrial Motor This motor is Approved for Hazardous Locations under: Class I Group D Class II Groups F&G HP: 1/2 HP Shaft: 3/4" X 5/8" Keyed No: F - AC717951 Spec: 35E371-528 Cat No: M14A 50340940 Frame: 56C Volts: 115/230 Amps: 8/4 RPM: 1140 Cycle: 80 Phase: 1 Class: B Ser. F: 1.00 Des: N Code: L Rating: 40C AMB-INT The body of this motor is 13 1/8" long, and stands 6 3/4" high. The Motor body is 7" wide, or 11 1/2" Wide including the Electrical Box.

Product Information Item Name: Eaton 109-1101-006 Hydraulic Motor Pump

MFG: Category: Bearings Part/Model # 25C015 J8 Description: BUYING 9 SHAFT ROLLER GUIDE - 3/4" BORE KEYED W/ SET SCREW HOLES--- -ALUMINIUM LOCKING COLLAR - 1/4" OD - 3/4" ID - 1 7/8" LONG ---- WITH NEOPRENE - NYLON COVERING - 1.93" OD X 1 3/8" LONG --- NEW WITHOUT FACTORY BOX --- 14253 --- SS95 --- E-1-3-3 --- 2 LBS --- TLB Payment Policy Payment through PayPal or Call 877-859-301

PARKER PV22D-090B-BB2-B Rotary Actuator. 150 PSI operating pressure, 90 degree rotation with internal stop bumpers. 1/2" X 1-1/4" keyed shaft, 1/4-20 mounting holes on face and bottom, 1/8" pipe thread ports.

Up for auction, Northman Hydraulic pump, 3/4" keyed shaft A-2 (3-1/4" pilot) #8 x #12 ports orb, 5gpm @1200 rpm 12.8 gpm at 3200 max rpm. 2500 max psi, CW right hand rotation.

Baldor Electric CompanyThree Phase AC GearMotor Cat #: GM3338Spec #: 25E314W002G1 This unit is new surplus and ready for action!!!

Jacobson Full Circle Pulverizer Hammermill (Model P-42236DTF) Stats: Manufacturer: Jacobson Machine Works, Inc.

LinTech M1-90612 Linear Actuator This well built linear actuator weighs in at about 19 pounds and features an 6"x8" carriage, 3/4" ball screw, 3/4" rails and a NEMA 23 motor mount. Travel as measured from the end of the linear bearings to the end of the linear rail is 13". The carriage moves 1/2" per rotation of the screw.

PROTECH Condenser Motor - 1/3 hp 208-230/1/60 (1075 rpm/1 speed) 51-23053-11 Technical Data: HP: 1/3 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 5/370 FLA at 230V (A): 1.75 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.):

PROTECH Condenser Motor - 1/5 hp 208-230/1/60 (1075 rpm/1 speed) 51-23055-11 Technical Data: HP: 1/5 No. of Speeds: 1 High Speed (RPM): 1075 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 3/370 (230V), 5/370 (208V) FLA at 230V (A): 1.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Fla

NEW MARATHON 1/2 HP ELECTRIC AC MOTOR

I am selling a used Baldor CM3542 industrial electric motor as shown in the 6 pictures and described.   All items I sell are warranted for 60 days unless otherwise marked.   Overnight shipping is available for most items.