3 4 threaded rod for sale, brand-new and used.

Sale includes (24) hangers for pipe, tubing, conduit, etc with an outside diameter of 3/4" or less. These hangers are good quality, plated and lined with a felt cushion pad. The hanger pulls apart for installation and is held together with a top fitting that is tapped for 3/8" threaded rod.

LIN - ACT AIR/HYDRAULIC CYLINDER 3/4 X 2 NEW OLD STOCK 3/4 BORE X 2" STROKE CYLINDER 1/8" NPTE PORTS, THREADED ROD END

This sale is for a total of 100 pcs. They all have a 3/8" threaded button. They have UL and FM approvals.

Size M1. Body diameter 12 mm, length 18 mm. Recommended rod size: 0.83mmImportant - use LOW cutting speed 20-90 m/min for thread rolling (or roll manually)

Size M2.2x0.45. Body diameter 25 mm, length 25 mm. Comes with a small caliber.

T-SLOT MOUNTED MILLING WORK STOP FEATURES: * BRAND NEW NEVER USED. NEWLY MANUFACTURED * FITS TAIG, SHERLINE AND OTHER MILLS OF COMPAIRABLE SIZE. * CLAMPS QUICKLY TO THE T-SLOTS ON THE MILLING TABLE .

* NOS ( New Old Stock )

Extended 5C Collet Stop Set for Hardinge Lathes, Chuckers, Mills, CNC, and others. Note: Easily and Accurately locate parts 7/8” diameter or smaller in any standard 5C collet with internal and external threads (Extender Tube I.D. is .900") 5C Collet Stop’s and Extender Tubes fit inside a 5C spindle with a minimum 1-1/16” I.D.

FOR SALE: ONE SET OF TWO ALUMINUM 6061 MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.75" LONG, .750" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

FOR SALE: ONE SET OF TWO SOLID BRASS MACHINIST CLAMPS. CLAMPS ARE SHOWN IN A CNC MILL, BUT THEY ARE GREAT FOR ANY MACHINE OR OTHER USE WHEN YOU NEED TO HOLD. CLAMPS MEASURE 1.875" LONG, .875" WIDE, AND 3/8" THICK AND ARE VERY STRONG.

This is a newly machined 47/37 transposing gear set which converts your 8 TPI lead screw to a 2.5 mm pitch. The thread’s crest-to-crest or lead error is only 0.02% or about 0.0025 inch for a one-foot long threaded rod. The transposing gears are under 3 inches in diameter leaving lots of room for closing the gear cover.

RBF Products Adjustable 5C Collet Stop * Up for sale is (1) RBF Products Adjustable 5C Collet Stop. * Condition = New * Made

RBF Products Adjustable 16C Collet Stop

RARE SELF-CENTERING VISE/VICE TOOL (Type Mechanism in Hermes Vises / Engraving Vises / Scissor Lifts) SCISSORS LIFT MECHANISM PARTS, DIY New old stock (NOS), minor surface discoloration due to storage. Rare Solid Steel Self-Centering Vise Tool Mechanism Parts Set. This is the same general type of self-centering mechanisms found in the superior Hermes Vises, other Engraving Vises, and small Scissors Lift Platforms.

This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.

You are bidding on a Vintage Vise. This vise is embossed HOLLANDS - ERIE, PA. U.S.A.