3 8 1 4 adapter for sale, brand-new and used.

DXL360 V2 Digital Protractor Inclinometer Dual Axis Level Box 0.02° Resolution

SlopeView TLL-90E Digital Protractor Inclinometer Laser MIB

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

2-1/32" hole ALL THE WAY THROUGH!!!!!! Brand new for SPRING 2013, this has been in the design phase for some time to make this truely different. Only available in 0-5 RPM, Perfect for TIG Special build 1 week delivery.

This is a Quick-Grip Screw-Clamp Saw / Sprocket Arbor Adapter used to fasten a saw blade or sprocket with a 1-3/8" bore onto a 1/2" diameter shaft. Here's how it works:1) Remove the clamping nut2) Slide the adapter into position on the 1/2" shaft3) Place the saw blade or sprocket (up to 1/4" thick) with a 1-3/8" bore onto the adapter4) Replace the clamping nut and tighten to secure onto the shaft This only takes a minute and you are ready to go! The nut is 1-5/8" across the flats and abou

Plastic Wheel Adapter - RED - Adapt a grinding wheel to fit your spindle. Plastic Bushings are: a.) 1 1/4" x 3/4" x 1" b.) 1" x 3/4" x 3/4" c.) 3/4" x 3/4" x 5/8" d.) 5/8" x 3/4" x 1/2" The grinding wheel in the picture is for demonstration purposes only, it is not for sale. I am only selling the RED wheel adapter.

TTC Precision End Mill Adapter - LENGTH FROM GAGE LINE TO PROJECTION FACE: Taper: 40 N.S. RS .: 3/4" 40 TAPER PRECISION END MILL ADAPTER - TTC Hardened & Ground

This is for One very nice used counter sink/counterbore tool holder without any cutters for it. 5mt shank This one does have the snap ring up inside it. I believe it helps to keep the cutter from falling out if your spindle stops too fast but it is not necessary for using it.

This is for One Good used counter sink/counterbore tool holder 1mt. This one does not have the snap ring up inside it. I believe it helps to keep the cutter from falling out if your spindle stops too fast but it is not necessary for using it.

14 piece lot of tool holder adapter sleeves. All are good and usable. The only damage is the cut on the face of the 1" one, which is plainly visible and shouldn't affect function.

NEW THREADED HEAVY DUTY 5/8" (16mm) Magnetic Drill Chuck with 3/4" Weldon Shank Adapter This is a new THREADED HEAVY DUTY chuck primarily used with Magnetic Drills for easy change to Standard Twist Drilling. It comes with the key, chuck and threaded adapter. It's virtually the same as our other HD Chuck with the exception of the threaded adapter and chuck instead of the traditional JT (jacobs taper) adapter and chuck.

var itemNumber = window.ebayItemID ?

We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! NL Make: Beaver Tool & Eng.

Large Taper Surface Grinder Wheel Adapter for 5” ID Wheels, Used: This used wheel adapter is in excellent condition. There is no brand name on it, but this wheel adapter came from a surplus lot we bought from IBM many years ago. All of the other arbor wheel adapters in this lot were Sopco.

This is a brand new 4" Diameter Precision Machined Steel Lathe Face Plate adapted to fit a Shopsmith. Here are the specs: 4" Diameter 1"-8 TPI threaded faceplate with 5/8" plain bore shopsmith adapter Machined steel construction Precision machined face with 2 rings 8 holes on plate to ease mounting of your work piece Weight 2 Lbs. - 3 oz.

8" Bison Chuck 3 Jaw "SetTru" Fine Adj Lathe Chuck + One Adapter Plate & Chuck Package 8" Bison Chuck 3 Jaw "Set-Tru" T.I.R. 0.0004" With 4 Fine Adjustment Screws , Scroll Chuck, Forged Steel Body, 3-pinio

THIS AUCTION IS FOR A NEW CNC LATHE CHUCK ADAPTER PLATE A2-11. COULD BE A KITAGAWA CB21A11. SEE SPECS CHART BELOW IN RED!