3 bolt flange bearings for sale, brand-new and used.

2 Heavy Duty Flange 1 3/8 Bearings (used in very good condition) The bearings have a small amount of sufface rust. This doesn't effect the bearing. The used bearing turn smoothly These are 2 used but still very good Flange bushing.

5pcs 0.885in (22.5mm) 3 Bolt Slotted Flange 2mm Thick Multi-purpose usage. Hard steel. Thickness: 2mmBolt hole diameter: 4,5mmDistance between bolt holes: 32,5mmDistance between bolt hole and flange center : 19mm Best for:

5pcs 0.885in (22.5mm) 3 Bolt Slotted Flange 2mm Thick Multi-purpose usage. Hard steel. Thickness: 2mmBolt hole diameter: 4,5mmDistance between bolt holes: 32,5mmDistance between bolt hole and flange center : 19mm Best for:

GRAYMILLS Centrifugal Replacement Pump - Model: IMS25-F 1/4 HP CENTRIFUGAL SUCTION PUMP - GRAYMILLS Immersion & Suction Applications Immersion Pumps (IMV-Style)

Benefits Dependable economical replacements for coolant pumps commonly supplied as original equipment on machine tools. Applications Immersion Pumps (IMV-Style) No bearings seals or packing are immersed in liquid making them ideal for pumping liquids containing fine contaminants. Suction Pumps (IMS-Style) They should not be used to circulate fluids containing fine contaminants.

THESE ARE SOME OF THE BEST IMPORTED BEARINGS IN THE MARKET!! DOUBTFUL?? CHECK MY FEEDBACK !!

THESE ARE SOME OF THE BEST IMPORTED BEARINGS IN THE MARKET!! DOUBTFUL?? CHECK MY FEEDBACK !!

ROLLERS, Conveyor type , metal , 4" diameter roller, 9" long, 1" dual bearing shaft, 1" x 3 bolt flange bearings with grease fittings..brackets [ end peices ] are 7" High x 5" wide x a 2" wide foot. smooth rolling, good condition, these cost around $90.00 each w/o brackets.... shipping cost is $15.00 for one flat rate, 2 or more will go Fedex at cost only..

Marathon Oil Burner Motor - 48S34S361 - 02424698700 Phase 1 Insulation Class B Frame 48M Duty CONTINUOUS Enclosure SEMI ENCLOSED Ambient 40 Mounting ROUND NEMA Design NO DESIGN CODE O

2 pieces, PEER flange mount bearing, 3/4" (.750). High quality double shielded bearing in cast iron housing, bearing is self aligning, designed for heavy duty. Shaft is held in the bearing via two set screws.

This blower is in very good working condition.BloApCo model # 40-2US Motor 30 HP208 - 230/460 volt 3 phaseMaterial handling blower/ fan

This blower is in very good working condition.BloApCo model # 40-2US Motor 40 HP230/460 volt 3 phase

NEW GRAYMILLS PUMP. PART NUMBER IMV08-F IT IS A CAST IRON IMMERSION CENTRIFUGAL PUMP 11-3/4 INCH IN LENGTH5 INCH FLANGE DIMENSION5-3/64 FLANGE BOLT CIRCLE6 INCH SHAFT LENGTH TOTALLY ENCLOSED MOTOR WITH SEALED PERMANENTLY LUBRICATED BEARINGS