3 gas pipe for sale, brand-new and used.

This is a New Replacement Ball Muffler For the Waterloo & Waterloo Contract Hit & Miss Gas Engines ...... Part # AG50 Fits: 2 1/2 3 4 & 5 Hp Sizes 1 1/4" Pipe Correct For: AMERICAN BOY, BANNER, BAUER, BIG CHIEF, DESJARDENS,

This is a New Replacement Ball Muffler For the Earlier Waterloo & Waterloo Contract Hit & Miss Gas Engines ...... Part # AG40 Fits: 1 1/2 1 3/4 & 2 Hp Sizes Correct For: AMERICAN BOY, BANNER, BAUER, BIG CHIEF, DESJARDENS, D. T.

This is a New Replacement Ball Muffler For Any Engine That Uses A 1 1/4" Pipe thread For the exhaust, It is Like Many Of The Mufflers That Were Made back Then & was used On Many Brands & Models Of Hit & Miss Gas Engines. This Is Bolted Together Like the Originals Were With 5/16" Square Nuts & Bolts, They were used On The Galloway, Associated, United, Witte, Amanco, 6 Hp John Deere, & Many Others, Basically anything with 1 1/4" Pipe thread Or Whatever You Can Adapt it to !!!!

This is a New Replacement Ball Muffler For Any Engine That Uses A 1 1/4" Pipe thread For the exhaust It is Like Many Of The Mufflers That Was Made back Then, But They Are Very Similar The Early Waterloo & Waterloo Contract Hit & Miss Gas Engines I would Say Before About 1910 Or 1911 ......

Honeywell C6097A1012 Gas Pressure Switch; Manual Reset M2; 1/4" NPT Pipe

Part Number 764 Type: 208 E1 1/2 PSI Max 250*F Max WHITE ROGERS 764-208 E1 Safety Valve and Gas Cock Gas Safety Valve 3/8 x 3/8 Pipe Size Stright Bottom Inlet 90o Outlet Inlet Thermocouple Connection Pilot Non-Regulated Safe Lighting, In Line Appliance Control with 100% Shut Off. Do Not Use on Unvented Applications SPECIFICATIONS MAX.

Central EF Tapping Tee This is NEW in bag, HVTT from GF Central, never used or damaged. Made: 7/2014 Description: GFCP Electrofusion Tapping Tees are designed and manufactured in accordance with ASTM F-1055 for use with pipe conforming to ASTM D2513/3035, F-714 and with Butt fittings conforming to ASTM D3261 as applicable. PE2406/2708 Electrofusion Tapping Tees are produced from a pre-blended virgin resin that has a PPI listing of PE2406 which com

4" Adjustable Gas Vent Pipe Model: 4RV-EZAJ18 Made in: United States Manufacturer: Selkirk Weight:

This is a New Replacement Ball Muffler For the Later Waterloo & Waterloo Contract Hit & Miss Gas Engines, All The Small H & K Waterloo Boy 1 1/2 1 3/4 with the 3/4" exhaust Used these Mufflers, As it shows them in the Sales books.....

NAT GAS, 3/4" FPT GAS IN/OUT, 3"- 6" WC, 1/2 PSI 250,000 BTU, MAXITROL RV48L-66-0001 AMERICAN RANGE BAKERS PRIDE OVEN WHERE APPLICABLE. BLODGETT OVEN SERIES: 900, 999, 1000, BCG, FA, GZL. GARLAND GRIDDLE SERIES: GD, BROILER G-80, IR GROEN KETTLE AH/1, AH/1E IMPERIAL OVEN IR,IHR KEATING FRYER BB, CC & TS: 18 & UP.

[TITLE]

WHITE RODGERS 36H32-423 The 36H Combination Gas Control Valve is a Versatile Multifunction Control Designed to Meet the Requirements for Use with Intermittent Ignition Systems (Direct Ignition, Proven Pilot). The 36H Valve is Our Highest Capacity Combination Gas Valve FEATURES • Inlet/outlet screens. • Ambient temperature rating: -40°F to 175°F.

WHITE RODGERS 36H32-423 The 36H Combination Gas Control Valve is a Versatile Multifunction Control Designed to Meet the Requirements for Use with Intermittent Ignition Systems (Direct Ignition, Proven Pilot). The 36H Valve is Our Highest Capacity Combination Gas Valve FEATURES • Inlet/outlet screens. • Ambient temperature rating: -40°F to 175°F.

This is a dual gas valve for in a counter top. Typically supplying gas to a Bunson burner. Mounting post is a 3/4" pipe thread.

NOW OFFERING INTERNATIONAL SHIPPING!! This listing is for 10' of 1/2" Natural Gas/Propane Hose with One SAE Female Swivel Fitting, One 1/2" Fixed Male Pipe Thread Fitting, One 1/2" SAE x 1/2" MNPT adapter, one brass 1/2" Quick Disconnect, one dust cap and one dust plug. This hose kit is brand new and r

Used GAS VALVE carrier bryant (EF34CW246) with Orifice gas pipe. SEE PICTURES! Includes Gas Valve, Gas pipe to burner with 44 orifice.

3/4" Galvanized Compression Coupling. Connections: Couplings and fitting shall be of the modified wedge-gasketed, bolt-less, compression type for plainend pipe.Uses: For use in joining small diameter pipe (1/2" - 2") steel pipe sizes.Not for use on gas service.

This is a never used Robertshaw Combination Gas Valve that has never been installed on a furnace. I used to train HVAC workers and used this valve in the demonstrations. I installed inlet and out fittings into valve so I'm listing it as used but it is a very useable part.